• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Heavysteven

    Why will my sending unit not shut off?

    Just curios, but i had no problem getting a tag and insurance. Tag was only $45 insurnace is $30 a month. I found the cost was not great for these two items. I did have to call and get a vin inspection but it was free and the officer came out to my house.
  2. Heavysteven

    M35A3 from GA to WA, I need ideas.

    Sounds like you have already decided to drive it. So my idea would be to buy a tow bar. Good luck and keep posting I am excited to see how recovery goes.
  3. Heavysteven

    Oil filter change Q's

    I would not use the NAPA filters. I found the Bladwin filters work best and the correct gasket is included. Also, don't let the canister rotate when reinstalling them.
  4. Heavysteven

    more room behind wheel m35a2 help?

    I have the same problem has well. Found myself looking for a way to slide the seat back after a hour of driving. 6'-2" 215
  5. Heavysteven

    Oil drain spacers?

    I reused mine no issues so far.
  6. Heavysteven

    Select Vehicles on Hold GL WHAT?

    Frankfort..i guess I was lucky they only took my shackles.
  7. Heavysteven

    M35A3 from GA to WA, I need ideas.

    Why not get a price from Eric hot shot transportation get an estimate? I figured I would not lose a day of work, no worries of break down, and no fuel cost. PM me and I can send you his number. Figure 1.50 per mile.
  8. Heavysteven

    the deuce shirt design for us deuce loves i need feed back!!!

    My thought would be to put "My ride M35A2" on the back. I would like to do the same thing. Are you making them or placing a order with a graphics company?
  9. Heavysteven

    EUC Holding Pattern

    Hang in there it's probally going to take the 60 days for your EUC to clear. I would not make to much noise if you go past the 60 days though. Just my thought any way. Good luck
  10. Heavysteven

    Help. im new to this

    In GA the answers are no cdl, register at DMV, and my insurance is through State Farm. In California I bet it's required.
  11. Heavysteven

    Deuce modern equivalent?

    Personnal opition but the CXT by International is my answer to your question.
  12. Heavysteven

    HELP!!! Advice needed with GL

    Through my experience the online help with Hiedi would be the way to go. My guess is that you a automated system has not put you in the black list. I would go through GL again if i had space for another duece
  13. Heavysteven

    Problems during fluid/filter changes and leak issues

    I was going to change my fuel filers as well (weather permiting). I did not think removing the fuel lines was required to change the filters. Was going to buy a strap wrench first though. When i have a questions about my truck i call CSI in Tallopsa GA 770-574-2033. Tom in parts would have the...
  14. Heavysteven

    Problems during fluid/filter changes and leak issues

    The Diesel Only Sticker means your fuel density compensation has been bypassed. However i have heard you can still run it has a multifuel. I have the same stiker on my truck and have decided to stay with diesel.
  15. Heavysteven

    m35-a2 vs m35-a3 whichn is better

    Some day soon the FMTV will be sold off......
  16. Heavysteven

    engine runs rough on start up

    Well, I used my flame heater yesterday switch above the wipers. I followed the directions only activated during cranking, lots of smoke. Did not know about the risk of cracked lines or o rings. That being said it helped start the truck.
  17. Heavysteven

    Newb in Irvine CA needs brake help

    Keith, Have you ever considered moving to Georgia? You sound like a guy in the know. Seriously though, I would be more worried where all your brake fluid went..lines wheels
  18. Heavysteven

    m35-a2 vs m35-a3 whichn is better

    If I had the money would have purchased a M35A3 w/w. To me hands down they look good, hydrualic winch, power steering, and CAT diesel...oh mama daddy needs a new ride How cool would it be to pual along side a FMTV in a M35A3....Guess I can dream
  19. Heavysteven

    engine runs rough on start up

    Had the same problem (only had the truck a month). Changed the oil, put in a diesel conditioner, and drained the fuel filters. Still runs rough in the cold 15-20. Put once it's warm runs smooth. I swear it likes new oil and new diesel. I would try that first and the move up the list. Good luck
  20. Heavysteven

    Breaker Panel Location M35A2

    Stumps, So if my heater blower is not working there is no way of just reseting the circuit? Next step would be to verify it's getting power I guess.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks