Search results

Coffey Lightfoot lol

Permanent leg damage for sure! Would not have wanted to been in that convoy.

wow!

2w091- I hate to say it but I disagree with that article. If you cycle the wheel 40 times all you doing is wearing out your arms and aerating the system even further. Same theory for bleeding brakes, if you rabbit pump the brake pedal, all your doing is moving air back and forth in the line. A...

To purge air from p/s system start truck, turn wheels to full lock right or left, turn truck off while steering wheel is at full lock. Let truck sit for 15 min. while off. Start truck, turn steering wheel the opposite direction, turn truck off, let sit 15 min. while truck is sitting you can...

Thanks Ray- I was under the same assumption that Florida residents got a good to go title, and according to the rep I spoke to it was a mistake on GP's end. I did have to send GP another 107.00 dollars. So, I don't know what I will have to pay at dmv when I go back.

I will try to make a long story a short one. Won bid on truck 9-30-15. Paid for truck on 10-1-15. Picked up truck on 10-8-15. So far so good---- received paperwork from gp mid oct. Looked briefly at paperwork--seemed in order--didn't think anymore about it. Untill--------- I roll down to my dmv...

locked up You can buy a marine axle for what a Detroit locker will cost, plus you would have your old axle as a spare. 2cents

Run a hose before the lift pump and manually prime it.(FROM THE INLET SIDE OF THE LIFT PUMP INTO A CAN OF DIESEL FUEL) If it runs- then you just eliminated half the fuel system. Good luck!

You guys are nuts! Open your freezer to get heat?

battery

Andy why cant you just check the harness with a volt meter when turn signal is turned on right or left, then tie in your beeper as needed.

conversion :funny: bazzinga!

surplus Man I wished I lived closer to that place. :drool:

AZK9- are you going to 3 color camo it or leave it 383. Either way, truck looks great! Good job.

Henkel adhesives is the one we used. Some of the heavy areas need a little finesse, but overall worked good. To tell you the truth I had only used this brand, maybe the completion has a better brand---Idk?

I forgot to mention that you can apply naval jelly to threads that are rusty or painted-- try it you likey!

Metal wabbbbbbiittttttttsssss!

I will be bobing mine after new year. Thank you so much for posting the rear spring plate mods.(very nice-clean work) My first bob I did I used deuce springs in the rear-what a mistake. I then swapped them out for 5 ton springs. I am putting mrap springs on this one(cleaner look) My question is...

You can put ospho in a pump sprayer and get the inside of your doors and frame rails (hard to reach areas) I would rather spend a few bucks up front to keep the rust demon at bay, then fight him when he sinks his teeth in your prized mv.