Search results

Is your in tank pump running strong and is the rubber hose inside the fuel tank deteriorated.

Each runner has two studs with nuts so if your daughter can count 16 of them, just pry up on it a little harder.

These fine folks might be able to help: https://www.transmissioninstruments.com/

Someone has right sides of these “fender toppers” on ebay but not the left side. I bought the one side and was amazed that the holes lined up perfectly on my 1025A2. So I decided to repop the opposite side. Common aluminum .25 thick. It is a mirror image of the ebay item except for a...

Needs hot batteries to crank fast. Crack open the fuel line between the fuel pump on the accessory drive and the unit injectors and verify good diesel flow when cranking.

Being in manufacturing I will hazard a guess. The number wasn’t stamped upside down there as the truck went down the line, rather, was stamped as was convenient to the operator of the brake press that bent that frame rail. The number is possibly the last few digits of a part number that...

Should be in here.

Nothing at all undesirable about a naturally aspirated truck. Runs just as strong as a LDT.

I doesn't matter. The lower the series number, the older the date of manufacture. But these trucks were rebuilt, sometimes many times, so a series 10 from the 1980's might be in worse shape than a series 1 from 1966.

Started life as this. Back of your frame is whacked off. Bed and whatever is left of crane is scrap. Box on fender don't belong there.

What nonsense return did they promise Uncle? And they sell those $100,000 LMTV s at Hawaii for $1000. They are losing their ass.

I was wondering who ended up with this truck

I just need the RH lower mirror insert, is this available loose?

The truck is 67 years old. It need the entire electrical system replaced or there will be a fire.

Those look like holes remaining from someone's long ago attempt to skin the roof with sheet metal.

If I were you I would disassemble your busted engine and rebuild what you have. Even if you need a block. The take outs can be iffy.

Make sure any take out engine you buy is also a GEP. GEPs came on the scene around yr 2000 and the GMs were prior to that. The GEPs had stronger castings.

When has your injection pump been rebuilt? It has lots of plastic parts inside that are only good for roughly 10 years.

He broke it. It’s 40 years old.

So the covid mess has opened up some rare free time. Today I visited the abandoned Camp Wallace antiaircraft training base in Hitchcock, TX. I was last at this off limits parts of the old base some 40 years ago when camping with the boy scouts. We found this “swimming pool” back then. Well...