Search results

I posted these part numbers and pictures in this thread before. Search my posts under my profile Sent from my iPhone using Tapatalk

My research shows the one piece works for all. On the m1008 I replaced a 2 piece with s one piece Sent from my iPhone using Tapatalk

Took the m1008 out for highway road test with the new vent seal. Omg the driver side door vent window was silent, no whooose, whistle. Now the passenger side was howling so that is next. At this point at 60 mph I can almost have a normal conversation Sent from my iPhone using Tapatalk

I use the seal kits from am-auto parts. They are good. It fit well but takes a bit of finagling on the vent seal. This is a good video series https://m.youtube.com/watch?v=JGMKPuS1NJQ Sent from my iPhone using Tapatalk

So I broke my side vent window on drivers side. Decided it was time to tackle putting a vent seal in. It is an 2-4 hour project dependent on how much refurbish work you do. I thought I had more pictures but I guess not The whole thing has to come out and then even the vent window and...

Thanks Joshuak for the bump. Yes I do have kits. The one thing you could do to save on shipping is find a local saw mill. They can make these for you. Will probably cost more than mine given they are going to charge you for the oak and my oak is coming off my property. Just giving...

Have you taken apart the wheel bearings yet and checked and served them. The 101 trailers tow like they are invisible. I would not modify the trailer, but then again I own a few of them and they are my favorite trailer. Start with the basics before tearing it apart.

Okay with the exterior looking so good now you will have to get the interior redone:) When you are ready I got the guy that makes new covers for everything Need to order SEM paint Lots more for you to do!!! Sent from my iPhone using Tapatalk

OMG LMAO Great Catch on that little detail.

We are waiting for the rambling !!! Sent from my iPhone using Tapatalk

That **** dog will kill him, demands more attention than .... Sent from my iPhone using Tapatalk

Those are all reposts from my truck. Commander has been on vacation. We better appoint a special prosecutor to investigate :) Sent from my iPhone using Tapatalk

Okay put the correct top on tonight Thanks for everyone's feedback I am not cutting down the top height. As soon as I do I would need the height! Sent from my iPhone using Tapatalk

Is popcorn girl attending?

Anybody else a bit scared how that thing is blocked up in the air. I did not look at the video but if you glance at the picture it looks like something that I would not stand near.

It would help If I looked up the part number :) I was thinking fuel supply line.

It is easiest to take to a hose supply shop. Make sure you get a narrow fitting on the inlet side or you will never get screwed back on. Fill the line with diesel when reinstalling and startup is essier Sent from my iPhone using Tapatalk

Pm address Sent from my iPhone using Tapatalk

I have a CUCV cross over also if in need of another. I have interest in this project.

The funny thing is the work kind of breaks out like this 15 % take apart stuff 10-20% body work 50% sanding 5% mix paint cleanup 10% paint 10% assembly Painting itself is a small amount of the project time Sent from my iPhone using Tapatalk