Search results

In this instance its not critical, but it would be a good idea to dive into the parts and operating manuals before making changes or eliminating parts. Once the smoke rolls out of electrical components its too late and gets expensive

So reading the manual and understanding the Aux heat system on the ECU the small stanless tank just take antifreeze correct? the manual stated to use what was on 0180 item x but no such thing exist in the manual from Poccur manual only goes 135 and then skips to 185

Check your starter to make sure the connections are good. the bad one i pulled had so much silicone on the connections you would never know untill you pulled the starter out. If you have a good starter/alternator rebuild place in your area and its just the solenoid that could be replaces...

You will not find the starter at the local Kubota Dealer its 24v. Does the unit crank with the dead crank switch? here you go. https://www.robertsandson.com/rs-182-30461.html https://www.ebay.com/itm/176656728950

Hvac tech and I came up with a plan of attack over the weekend. hopefully this might be back up and running next weekend if things go well. Boy i need AC to work on anything right now its so humid. I can post a wanted ad but will definitely need the supply and return ducts for this unit if...

wow i would like to see 512 or even 256 sets paralleled

Radiator Cap (or in the manual "CAP, FILLER OPENING") Manual shows Stant R28, which crosses to Stant 10228 which crosses to NAPA BK 7031696 Lev-R-Vent version is Stant 10328 which crosses to NAPA BK 7031460

AMMPS units usually come with the wiring schematics in one of the boxes they are lamenated on a single binder ring but since this was a used unit it may have disappeared from the unit

Sent a request last week for any type of user manual, TM or parts books and have had no response.

I am not involved in this sale, but even with residential charges i believe you can do better on shipping. Here is some information from my broker give him a call Erik Stephen L. Ardelean, M.B.A. Logistics Specialist - North America and...

right before the 90 degree fitting going down to the fuel pump use a zip tie and hook the line to the hard fuel line. I know you mentioned the zip tie , but i see it is not there

Do yourself a favor when you go to prime the unit and slave it from the 803. it will save your arm a lot of pulls. 17mm wrench crack the nut on the pump get fuel, then crack the line on the injector till you get fuel. Also don't forget about the decompression lever if your pulling my hand, it...

I keep One unit in the back of my LMTV for any power needs or if i need to charge batteries. As i fix these units i use them around the property to run 1500 watt space heaters while working on equipment outside, or charging batteries, or using heat gun or portaband saw. I have sold many units...

i have been on their website, but have not sent a formal information request. I knew it would be a tough one, honestly not that many difficult parts. I will say its so strange working on something military that is only 12v and does not have a NATO plug. I will let you know what i find out.

NSN 4520-58-000-0441 Contract Number FA8533-08-D-0007

Looking for a technical manual. I realize is airfore

Ok so you go to the 24p manual when you get to the page 0141-3 if give you a break down of all the parts so missing in your picture are parts 23 and 22, next you go to the parts listing 0141-5/6 parts 22, 23 and they give parts numbers that come back to Yanmar parts numbers because this is a...

Picture 32

Is this unit from Gov Planet Item Number 13278687 If it is i see in the listing pictures the air filter has been removed and the oil line for the turbo appears to have the Banjo bolt holding it on is missing. Just trying to get a feel for what i see

https://www.steelsoldiers.com/threads/mep-802a-and-mep-803a-coolant-overflow-cap.148422/ https://www.oreillyauto.com/detail/c/dorman-help/dorman-help-coolant-cap/mtm0/82594?q=82594&pos=0