Search results

McMaster Carr app is great but searching things on your computer is far better. search molex connectors. I think they are the .093 size but check yours using a drill bit with the same diameter or calipers. Search Amazon for crimp tools.

McMaster Carr

Actually if you could tap the hole without drilling it any larger would be the better route. Reason being if you went the plate method you would have to machine an oring groove it the plate to match the valve body. Because the wheel doesn’t have the grove in it and it seals on the flat surface...

If you wanted the aluminum wheels and wanted to delete the CTIS valve you would need to tap the large hole and adapt it to a Schraeder valve.

Personally it’s a look thing, to me they look more heavy and cleaner without all the hoses. Definitely coming from experience not enough weight savings to make a difference still stupid heavy and difficult to mount, dismount,

Oh……Sooooo I totally forgot to mention I have a source for them. I just purchased 5 of them WITH 80% tread tires $200 each. They have almost a 100 of them. Lucky for me it’s only a 15 mile drive to get them. But he can put them on a pallet and ship the for a reasonable cost. google, Florida...

How do you add a video here?

I verified it this morning that these wheels have the exact same back backspacing as the steel wheels. To easily identify these wheels pay attention to the fact that they only have the 10 lug nut holes and the hole closest to the CTIS valve is larger than the rest of them.

Sorry guys about the shiny paint! I had to do it to make my wife happy. If you only knew how hard it was to convince her to travel the country in this set up. So I’ve had to make some sacrifices. But I’m used to trail rash, they all have a story behind them. Been back road exploring for a long...

Fabricating the back porch. Removed the louvered panels and installed solid panels and sealed it to make internally accessible storage cabinets. testing the motorcycle lift. fabrication of the porch roof hatch door. Testing stair lift

Here is everything finished and mounted. I also replaced the 20 rusty nuts that hold the two wheel halves together.

This might be to deep!!!!

I live in Wauchula, FL about an 1.5 hr south west of downtown Orlando in the country. what area of Orlando are you moving to?

If your actual parking brake engages? That should NOT happen. I would start by replacing the parking brake valve on the dash.

They finally arrived from Hutchinson. The new orings and the CTIS lug nut kits. The lug nut kits came with 2 orings the one for under the nut and the one for the back of the wheel.

So you don’t no what they are! 🤣

What’s JATO?

I used 12 automatic recpro heater and hush mat stealth black for the insulation. mans for the sending unit these are great. that KUS also makes analog water gauges with white and black face. So I used white for fresh and black for grey water.

Ramdough I thought you lived in Florida? I have a tank heater on the bottom of it.

Fabrication of the 100 plus gallon fresh water tank.