Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
But does it shed sticky mud? That is what counts. She does look sharp. Wanna paint mine? Virginia isn't far to travel, compared to Poland or Australia...
Bulldogger
I think Juan means the rebuild kit is particular to military brakes only. The brake pads and rotors for a 1984 AMC Eagle wagon fit the Hmmwv because that's what they started with, but if I understand the evolution of the M998 brakes they had to improve them and so the calipers departed from...
I'm not sure about a civilian part #, but according to the Hummer Knowledge Base the AMG seal kit part number is 5744403. That might help track it down.
http://www.hummerknowledgebase.com/brakes/rebuilding_rear_calipers.pdf
http://www.hummerknowledgebase.com/brakes/rcr.html
Bulldogger
I had the same thought. This should be taken as warning that the seller has done little, if anything, to improve its condition and any claims of "I replaced all the fluids and fixed the xyz", or what not should be treated with suspicion, if the seller makes such claims.
It seems like a lot of...
I wouldn't trust the adhesive myself since it is intended to stick to flat fiberglass or aluminum siding on RVs. I'm sure it does a decent job for which it was intended, but anytime I use something in a non-standard application I like to over-engineer it.
In that case I'd use rivets or drill...
tobyS, just to share, I was searching for rain channel weatherstripping or something like it and discovered a product from TRIM-Lok that is a peel and stick PVC plastic rain channel just under 1" tall. Might be of interest to you. It's available on Amazon, search for TRIM LOK Drip Rail.
I...
He is either very busy or distracted, which can be true and forgiven to some degree, or he's courting a less-savvy Rube to try to sell him a pig-in-a-poke. Either way, better to stay calm and detached.
BDGR
Between 27 and 28, the manual says 27.something, I can't recall the exact spec.
The TM explains how to adjust the regulators (depends on which alternator/generator you have). The 60 amp regulator is a snap to adjust, in my experience.
BDGR
My first impression was to kill the engine, but a diesel can keep going if it can pull hard enough on the fuel source and especially if it has an engine driven mechanical pump.
Aim for a row of Prius' I guess...
BDGR
Disconnect, clean and reconnect all electrical lines.
Is your dash well-grounded? Have you a grounding kit? Bad ground causes a lot of troubles in these rigs.
Bulldogger
If the replacement idler arm was a gen 1 M998A0 part, it could have easily blown out again. They are NOT robust. Definitely inspect your steering soonest. Easy way to see and diagnose issues is to put the front on jackstands and wag/wiggle the tires hard by hand while looking at the steering...
Welcome to the club!
The steering play is a common fault, and almost certainly related to your drag link losing its grip on your right ball joint. I replaced my steering with H1/A1 components, to include the idler arm (all but the steering box itself), and am pleased with the improvements...
Welcome and congratulations! Looks like a good start. Most likely culprit for no start, if it's been sitting a while, is bad fuel and old fuel filter. Drain and refill tank and put a new filter in and see if that helps
If you have no leaks on a Hmmwv, the first suspicion is that it's out of...
Interesting. It certainly doesn't look like it will part from the top/strip. Probably been together 32 years, I suppose that's why. I'll be sure to take a harder look at it the next time I have it off, which won't be soon since it's covered by snow right now.
BDGR
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.