• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Vic 3 Questions

    The lite system has one main box{ small } and each crew box will support two headsets. The heavy system crew boxes will support one person per box. There is a couple pdf's that have info...search : vic3 intercom
  2. 86humv

    Charging system (yes I searched!!)

    Happens to those GP trucks with dead batteries and they jump start, then gen. works like heck to charge......then Pooof ! PCB box gets damaged sometimes also. Thats what I here from some buyers. Batteries need a good charge prior to starting truck. I have a good 60 amp available.
  3. 86humv

    Tips to short list HMMWVs up for auction on Gov Planet

    west coast bases placed a tag on the A beam right below heater area.
  4. 86humv

    Issues with 2.56 ratio diffs

    Early trucks used 2.56, then later 2.73, then up armored used 3.08's.
  5. 86humv

    Scored a M1038 listed as a M998.

    Nice truck. That has the best front guard out there.
  6. 86humv

    Home at last: 94 M998A1

    Make sure dip stick has the O ring
  7. 86humv

    Alternator question

    Dead or low batteries can kill the regulator.
  8. 86humv

    HMMWV headlight issues?

    I have about two feet of the original 3 wires with ends and a switch if interested.
  9. 86humv

    hmmwv exhaust heat shield noise???

    The small dip stick heat shield clips and bolts to the big shield for the right exhaust.
  10. 86humv

    hmmwv mod

    Yes...the V belt 6.5 has same mounting points.
  11. 86humv

    hmmwv mod

    You will need a steel 100 amp bracket, and a different pulley, and some hardware. I have the pulley and bracket available.
  12. 86humv

    Engine Wiring Harness

    That looks like a 6.5 NA harness. I have those type.
  13. 86humv

    Problem connecting RT-524 to VIC-1

    Later Sincgars cables have a bend to them, and the older cables don't. You probably have a sincgars cable.
  14. 86humv

    HMMWV headlight issues?

    I might have a donor harness with that one. I also have switches. I'll check Wed.
  15. 86humv

    Truck lite LED's no low beam

    Ive had 40 pairs in the past, and some only Hi beam worked. Just have to replace it
  16. 86humv

    Gun racks in the humvee

    I have these available
  17. 86humv

    Truck lite LED's no low beam

    Headlights have 3 wires...........#16 17 18. Some that are not headlights but look the same have only 2 wires.
  18. 86humv

    HMMWV Starter

    27D from heater sw. to CB-1....27C on CB-1 to H on PCB. CB-2 has one side going to gauges [ 27D ], other side 27B to 29C to PCB "B" and 29B to 29A to start switch run. Start switch momentary position 14A to neutral switch.
  19. 86humv

    HMMWV Starter

    Im in my lounge chair...... How u gonna get thinns done on them trucks inna lounge chair ?
  20. 86humv

    Wheel Pattern For M998 Same As M1123???

    There are 2 types of 24 bolt wheels.....even spaced, and paired spaced which has the different valve stem. The early and late 12 bolt and early 24 bolt all use the same stem.
114,254members
167,173threads
2,353,481posts
4,378online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks