Search results

You can put air in from the other side also

Something like this but less body panels and here's one cool cucv with a gun mount and a MK19!

Okay finally getting around to this and I am wanting to build this starting with the tires, humvee 24 bolt, which will mean that the D60 and 14 bolt are needed. That will probably mean that I use the 1008 frame and the 1009 firewall and floor. This will be a build trying to stay with what I...

Be careful some are omni voltage and some not.

Baradium I have talked with the company reps and their engineers for both the Amsteel Blue and the Esmet ends and yes you can use highest grade for a military truck and be within the safety factors. I personally would use the same size line as specified in the TM for the truck you are putting it...

Okay I think you have two different problems the tire has a leaky seal somewhere try putting a valvecore in the valvestem and reinflating it. The oil is a slow leak from the wrecker body that will run out there because of the low tire tilting the body that way just a little.

That solenoid in these trucks tends to have problems with under voltage, known problem in service and not fixed. If you want you can use a small piece of metal to jump across that solenoid and crank the truck many times when the voltage is not enough to do so with the starter switch alone. But I...

Hello Logan welcome aboard. Pictures and if you need something give me a call.

Double check with GOVLIQUIDATION in AZ to see if they will give you a SF97 they will in most cases.

Like was said 2 spare trucks, but the stock BII is what should be carried and then maybe a few other pieces. I recommend that you use some improved bits of BII like make a gladhand adapter and use 1/2" or larger air hose so you can run a bigger impact and get an air chuck that has the rings cut...

Here's one

Yeah you can find them civilian but the 5 ton would be a bit small for hauling armored vehicles. The PLS and LHS are complete trucks like the one you posted from Brittain.

That is what we call a LHS load handling system or PLS palletized load system. They are for sale state side.

I know the Garwood winch is the same as the one on the 939s which is hydraulic. So the transmission PTO is the way I would go

Cucv lights are all 12 volt

Hope you had your new doors and windows in place before you did this.

Size? Weight?

Okay every air compressor on a 5 ton I have opened looks like the picture he posted of the burnt gasket and I have opened a bunch, all 809 and 939 series used this pump. I personally think that the top head should have been made of cast iron and cooled like the middle. the aluminum head is...

The standard 10wt is good down to -15 just use that. I want to know where everyone keeps getting to run 10w40 I have never seen it in or on the trucks or in the TM. If you are having problems I can put you in touch with folks in AK that can help you find a store to ask what everyone else up...

Hey I bet I could get a horse for trade. Hope the wife is getting better.