Search results

Yes those are stock deuce wheels. Lock ring tube type wheels that people use to mount tubeless 395's with tubes. Not the best set up. That tire is dry rotted and will blow out. Many vendors offer 395s now, that is the most common US Army tire now. Shop price and delivery cost. Ask for...

There are F and L 134 engines. The valve in the vent line is for the fording kit. There is or should be a second valve next to the positive crankcase ventilation valve. When both are closed, blowby pressure will build up in the crankcase which will keep water from seeping in.

No not the entire knucke! There are plastic bearings that need to be replaced. Off Road Design is a good parts source for upgrade design parts. The oem parts are flimsy.

Sounds like what is called “death wobble”, can be caused by many issues but by far the simplest to fix is tire defects like you have. If problem remains after new tires, the knuckles on the front axle will need overhaul.

Welcome Shaun. It appears that GP purges off the sold listings after about a year or so.

The six hole rectangular pattern on the flat plate mounted a “sugar scoop” antenna bracket. Entire thing looks shop made.

Maybe I can offer a little motivation on the 757s, I had the pleasure of driving a 656 back in the day and OMG what a screamer that truck is, the Allison keeps the turned up 220 hp LDS way up in the RPMs and man it runs like a scalded dog, very impressive.

Wow, you live in the epicenter of MV barn and pasture finds, people have been hauling stuff off Ft Hood auctions since WWII. I used to be guilty of that myself.

Well if it’s a flathead with 4 spark plugs sticking up out of the head, it’s a 134. To see if you have a M38 military engine, look at the serial number boss near the water pump, a M38 engine will start with “MC”. Regardless the post war flathead Jeep engines are basically the same 1946 until...

Power steering pump.

Apparently you must be unaware of this, the “bots” send you directed advertisements based on your search history.

Does a sledge hammer fit in them? Might be to hold hammer needed to drive in ground rods.

Suggest you leave the transmission oil level 1" low inside the case and use 80W-90.

Is it dripping GO 90 or OE 30?

Suggest you verify the gauge temps with a thermal gun. If you are truly near boilover, look for clogged radiator tubes. No clue if your electric fan has enough CFM to do the job, suggest you get rid of it and go back to the very dependable mechanical fan.

Is your PTO engaged?

Be glad they didn’t use a chain saw to remove the fording valve. All the pieces they removed are readily available.

I agree, 1970's vehicles such as the M880s did not get 24087 semi gloss. 34079 is the base color of most MERDC patterns.

No, that is a WWII color. 24087 would be under a MERDC camouflage. No doubt your wrecker has 383 green on it NOW, but you can be assured that that paint is not what was sprayed on at the AM General factory 39 years ago. These "A0" trucks came with alkyd enamel MERDC camo.

Suggest you go over the harness extremely thoroughly from the WTEC III controller to the transmission looking for more wire issues. Especially where the harness flexes when the cab rotates. The controller verifies that the two wire solenoid circuits are: 1. Not shorted to ground 2. Not...