Search results

OK once pressure gets to 120 then Ctis will to a tire check if any tires are just a little low it will fill them then go from a blinking hwy light to a solid light. Now if one or more tires are way low it will not fill tires until you tell it to by pushing run flat then it will go from 4...

The only condition the factory said that the ecu or black box is dead and no hope for it are 5 solid red lights other than that you have other problems that we can help with

Ron when I first join the green iron club, I knew nothing! But with some kind help from guy's here I have learned and now I am on my third truck it's not a bad thing to steer someone to the Tms it's how it's done. I appreciate everyone that has been patience with me as I learned. You also have...

I know some questions get old to the guys that have been on here for years. But there will hopefully be new guys to replace us old grouchy guy's to keep the hobby alive after we're dead and gone so here's my thank you for not scaring the crap out of a new guy.

Talked with Durham lost my cabin that I had reserved They have got me into another one. The only difference is it has no kitchen O well I don't need no kitchen so all is good.

Wanted Need a pioneer rack for M923A2. Don't need the tools just the rack

Welcome from South Carolina

Looking good

I have painted two trucks with it and love it. Don't use flat if you take your truck in any red mud the flat seems to grab it and it's hard to clean use semi and no oils or mud will cling to it

Yes you are correct but if tire is below low set point 4 lights will flash and will not do anything else until you hit run flat then you will have a flashing hwy and run flat light unroll it gets to high setpoint then run flat will quit flashing and hwy will continue flashing until it reachs...

5 lights flashing good. Five solid bad. If they are all solid red the ecu is shot. All flashing there's another problem. Hit run flat and if it's. A tire that's low it will bring it back up then hwy light will go solid and run flat light will go out.

A picture would be helpful.

There is no solution to this. You have just entered the twilight zone. Trans oil is like women every person has a different opinion on what they like. I myself just want a smooth well running one that has no issues. If she ain't fussing be happy.

There is no solution to this. You have just entered the twilight zone. Trans oil is like women every person has a different opinion on what they like. I myself just want a smooth well running one that has no issues. If she ain't fussing be happy.

If you are unaware do NOT take apart any part of the brake system that looks like a can there are springs in there that will kill you.

Yes I agree but I will still try to covert when I can.

Yup I am trying my best to convert you to the big boys Will.

Or get a truck that don't need tools lol

First off did you take a Scotch bright pad to the entire truck to dull the clear coat. I then would have shot the entire truck one time and even you had some places that needed going over do it right then. I shot my M923A2 in a day an hour later the paint was dry a week later and it's hard...

Yes you should have used behr marquee paint with primer. It cures quickly .