Search results

I like the wallpaper. Just take out the title and then they will shut up. Some people can be so anal. :oops:

Another solution once the pipe is repaired or replaced is to cut the top straight and put a flapper cap on it. you can get them at Napa for 3-1/2" pipe. It's not original equipment but i think it's easier in the long run so you don't have to remember to put the can on each time. Also if you...

I do not like the single pivot point of the top holder. It could rotate from vibrations and short the top terminal. I would add a perpendicular flat metal on eacc end that would be an upside-down u to go down a little on both sides of the battery.

I wanted to thank you guys for posting the wiper part numbers and where to acquire them. I just received the set of wipers from AMAZON and they look awesome. The arms seem to be of much better quality then the ones i bought years back from Saturn surplus. The ones from Saturn were cheep...

Maybe someone hitting the holiday juice early? :beer:

You can buy a Class 5 hitch on Amazon.com that is already set to the 34" frame spread. I did that on my M109A2. The bolt holes centered on the frame. 6 holes later I had the hitch installed. It is included in my thread on my M109 Restore project.

Put it in the classifieds: DRIVEN ON TO SITE!

I would have put a 3/8" triangle plate from the receiver tube all the way up to the top of your plate or welded some 3/8" x 2" flat iron on both sides of that front plate to stiffen it up - since it is so tall.

Most trailer dealers sell these as parts. I know Franklin Trailer in NJ sold all kinds of trailer receivers and parts as well as trailer lights , brakes, axles etc. There should be some trailer dealers in Florida.

2 eagles think alike! fat lady sings

Maybe you have a hole in the rubber hose inside the fuel tank or the hose is off the pump connection. Just take the whole assembly out and check it.

I agree, take it to a trailer dealer that sells part. He can match it up to it or order it for you.

So did you learn anything from this experience? Alway check the damage before ordering parts. Also a famous George Carlin line. You should never assume. When you assume you make an ass out of u and me fat lady sings Oh BTW nice job on the repair. I would not have a clue as to what to do...

Just call him a SLACKER every time you see him and he will eventually avoid you like the plague! :nothingfunny:

Here is my ferret. Much smaller and more maneuverable. Arctic camo. :jumpin:

Battery equalizer is a better way.

I need 2 of the 11.00R20 XL's transported from Buchanan, GA (patracy) to Slidell, LA (goldneagle) I'm in New Orleans area. Any help would be appreciated. I am located Exit 80 of I-12.

drain valves?

I see a sanitation problem. Depending on the use of the sinks. In a restaurant it is against the sanitation code to have the sink drains tied together. Example: if you a washing veggies in one sink and dumping dirty water in the 2nd it could contaminate the food in the first if the drain got...

I used Vasoline to do the same thing as that liquid. i used a cheap disposable brush to apply the Vasoine. After the paint fired real good I used some paint thinner to remove the residue. Works great on small diameter tractor mower wheels.2cents