Search results

SAS & LDRG. Good choice. My 48' CJ2A is being morphed into an parade SAS jeep.[emoji106]

Nice! Is it hinged at the tongue end, with pneumatic cylinders to hold it open? Or put the hinge on the side. So much easier to use if it is going to be a camp trailer.

That ekm meter is nice. Could easily be wired inline with the output from the inverter and only $90. Good find. A $20 kila-watt meter from wally world and a cheap extension cord, $10 and you could also wire it between the output of the inverter and your outlets. The $90 option would be...

Looks like they sell a viscosity cup type gage at home despot. Something like this: http://m.youtube.com/watch?v=eR-ta50Ubrg

Twofive35, the Wagner power painter I use has a plastic gage, like a long thin pitch fork, with 1/2" gap between the forks. You dip it in the paint and if the paint can't bridge the gap then the paint is thin enough to spray, otherwise you drip another few drops of water into the paint, stir and...

Florida AKM, look at the hubs. There are probably 2 screws in each hub already. So you only need 8 in the bag. If you are talking of the large gasket that goes between the lockout and the hub, a bit of rtv at the tears will make things seal. You should only need the inner circle of the...

Thanx a bunch for the pictures Flywheel. And for taking the time to disassemble the fuel can setup. It is most appreciated. I saw another front bumper mount fuel can setup that used the jerry can holders And they cost in the $65 each range. Your setup looks like something I could fabricate.

My hubs made it to the Columbia Basin of WA today. Looks like they were also trying to claw their way out of the box. Maybe consider sealing them in a free USPS tyvek mailer before sealing them in the cardboard box. No more cost to the mailer, but harder to lose a single part. Off to leave...

Very nice acquisition. Congrats. Could you provide some pictures of how the front bumper fuel cans are mounted? I really would like to duplicate that look.

I might have to paint my rims brushed aluminum now, in order to match the lock outs. Although your black rim with aluminum hi-lites is nice also. Thanx for the front end version of the step Xstep. I will have to wait until noon for the mail to be delivered, and even then it is not a sure...

So who is going to do a step by step installation thread with plenty of pictures? Or is it as easy as unbolt, bolt back on? Do they need axle shafts with splines at both ends? Guess it is time to go look up some locker threads.

Ups, USPS, or FedEx? Another SS member in WA, dry side.

HUM469, There are YouTube videos of the v8-454 gama goat. But there were never any completed project posts. Thank you for posting up the pix of the completed project. https://youtu.be/05BTEaPAgI0

In case you need the address for you money order. Please make it payable to C&C surplus. Steel Soldiers Hub Group Buy 3445 Bus Hwy 27 STE 1 Buchanan, GA 30113 But please place C&Cs mailing adress on it. (More about this further below) I will be forwarding the checks to them.

If you phone was smart & had a sim card. Your contacts could be on it, and retrievable if your new phone uses a sim. Just swap the card and copy them into the new memory.

I am also interested in this and would appreciate seeing pictures of a 5 ton power steering box setup on a deuce.

I am in. I will commit to one set.

Scott, I'm not in Lacey, but can I give you a call to help me debug my 900 series air brake system? I heard you are an expert.

Here they are: https://youtu.be/11DurwyCi64 https://youtu.be/SuOExEW3lsI

I will have to try and post the link to the YouTube page. One of the Tamiya big wigs is a member of a Japanese MV club and has a m792 goat. He fixed it up and used it as a static display at a toy convention when he released the model. There are also YouTube's of the goat in a jeep convoy as...