Search results for query: dynamat

...brought up some posts here on SS and online, but really no comprehensive collection. For all those that used Kilmat, Fatmax, Lizard skin, Dynamat, Hushmat, or any generic brand, maybe you would like to share your experience for the rest to benefit from? Mainly, which materials have you...

Regardless of the level of insulation, given enough time anything can get extremely hot. The more insulation the longer the process takes. I have a 9kbtu mini split and it easily(less than 20% duty cycle) keeps the 20ft shipping container comfy during 90 degree temps in full sun.

so how did that A/C perform under those conditions?

...It's quite the engineered coating. It's used by the Navy, and by many integrators - used on the engine dog houses on fire trucks. Unlike Dynamat and other "consumer" solutions - "Lizard Skin" is just a consumer facing brand name that was spun off by Mascoat. It's made in the US...

Got the ceiling covered in Dynamat Xtreme, except one "test" spot. Though hot I can hold my hand on the Dynamat, the test spot is hotter. Difficult to keep my hand there long. At 5:30pm CDT Ambient outside 97° Air in the closed up parked cab — 106° Surface of the Dynamat Xtreme ceiling —...

We just stripped the cab out. Adding non truck accessory electrical off the second battery bank, second Victron 24/12v 70a, adding DynaMat and DynaCore sound and thermal insulation, painting the interior, building back wall and ceiling panels, 24v Nomadic x3 AC—

...capacity. My vintage air system puts out 18000 btu and it's not nearly enough for my m1009. I've spent at least 15 hours of work adding dynamat and thick closed cell foam to the floors and firewall and the AC still cannot keep up if it's over 90f. I still need to insulate the roof and add...

Thanks, I’ll order some and give it a shot! Sent from my iPhone using Tapatalk

...designed to stick to the floor of a car, directly above the catalytic converter, which will operate at 600-900F, so I don't see any problem with regards to heat. I've never used that Kilmat sold on Amazon, but I have used many rolls of Dynamat and the Amazon one looks pretty similar and cheaper!

...all the fasteners removed/loosened it was still stuck really good so for those looking to improve the seal around the dog house I recommend adding kilmat/dynamat around where the doghouse sits like this. you can't see any of the kilmat once the doghouse is on but it really improves the...

HummerH1 just did his with cheap Amazon Dynamat equivalent. He loves it. PM him for details and pics. Also people use Tractor Supply horse mats cut to size as floor mats and say it also helps. SteelSoldiers is using Lizard Skin right now and writing about it in his thread.

very similar I am also using kilmat and was thinking about doing almost the same thing with the dog house cover but going dog house/kilmat/stock rubber/MLV/foam may have to put the MLV behind the rubber as it's heavy but would like to put in front. today I added kilmat to the valve covers, back...

Let us know how it goes, I'd be shocked if dynamat will stay on the oil pan or bell housing. You have heat, wind, and gravity working against you. By the way I'm working on a very similar project, just having installed horse stall mats on the tunnel and floor. I also installed kilmat (similar...

...tunnel, bed, and one rear floor mat. Gonna need another 6x4 sheet if I don't want a bunch of little pieces on the floor mats. Also used a dynamat like product on the oil pan and bell housing will see in the morning on cold start if it helps with the noise. I see it helping a little with...

DynaMat glued to the doghouse, DynaCore glued to DynaMat and itself. We taped the DynaCore seams, though that didn't work well, so pulled it out. It seems fine for now. She is much quieter, doing the inside is going to make her purr—

...it is from my S&B intake as other trucks I’ve owned that had a “cold air” intake also droned bad. I’m going to swap my hood insulation to Dynamat, and if that doesn’t help going to look into a different intake. - T-case has a few small leaks so going to pull that out and redo the anaerobic...

...of Helicools Helipad, and Broke Overland for some inspiration. Apply three quarter inch thick foil backed under Hood insulation from Dynamat or similar underneath the dog house also. Use self-drilling and tapping sheet metal screws for holding the top up or use rivnuts in the holes already...

Thank you for your help.

I put dynamat in almost all the panels, automotive grade foil backed floor insulation across the entire floor, dynamat 3/4-in hood liner underneath the dog house, Rockwool insulation inside of the back panels under the back side windows, several layers of intricately cut foam insulation all over...

I would want the oposite of Thirds installers what i want is natural born ho's with or without hair or bikinis just a nice tan and willingness to please others ! Its like the comedian said WHAT HAVE VIRGINS EVER DONE FOR ME ???? NOTHING ! Carry on !