Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Trying to get the 200amp system on one of my vehicles to charge as it basically never charged since I have had the vehicle. It had the following 200 amp generator on it (non-NSN stamped on it - Picture 1) and a 2920-01-300-3737 200 amp regulator on it by prestolite. The regulator was...
Have a 1993 M998, everything seemed to run fine until I noticed an issue about a week ago after apparently the vehicle was left in the "run" position overnight. Went out the following morning and found
1) both batteries seemed to be dead. (1 week old correct military batteries (Aug 23...
1) did M151 engines have casting dates on them?
2) did Willys M151s use Muncie (spelling) marked transmissions with the two yoke retainer tabs that are found on the 1962 and earlier M151s?
1) did M151 engines have casting dates on them?
2) did Willys M151s use Muncie (spelling) marked transmissions with the two yoke retainer tabs that are found on the 1962 and earlier M151s?
What is the correct inner tube valve number for stock m37 rims and military tires, tr75a work but the valve stem is pressed hard against the rim and takes a screw driver to pry the valve stem away from the rim to fill it. thanks in advance
What reduction percent or 1:1, 1:2 etc should I use to thin/reduce for spraying with a good quality HVLP airgun? Thanks
ps: tried the harbor freight electric sprayer but just way too inconsistent in pattern and lots of drips.
thanks
BEWARE OF PETE’S MECHANICAL SERVICES OF TAYLORSVILLE NC
Pete's Mechanical Services in Taylorsville NC. 951 Hwy 16 Nth Taylorsville, North Carolina 28681
(704) 402-8332
Last year, I took a M56 Scorpion CD-150-4 transmission into his shop along with a bunch of other parts to have dustless...
Not sure what they are called but they are the little OD plugs that push into intercom plugs that are not being used. Need 4 or 5 of them.
Thanks
Jason
Can't find one, anyone know the number, I know they are out there as a friend of mine installed on on his M114. I wouldn't mind mounting one on my V100.
Jason
have a rubber boot on an axle that is original to the vehicle and would be more than likely hard to source another if it fails. it is still nice and soft but has a few cracks in it that are not all the way through the boot. this boot is used to keep oil in the cv joint and water and dirt out...