• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    M-37 Starts Hard When Cold

    Can anybody tell me what the Ohm readings should be on a 24 Volt water proof ignition coil for a m37. I have weak spark and I have a new set of point and condenser but want to make sure the coil is not bad
  2. S

    M-37 Starts Hard When Cold

    I dont have a spare 24 volt coil.
  3. S

    M-37 Starts Hard When Cold

    a.stalzer83@gmail.com this all you need
  4. S

    M-37 Starts Hard When Cold

    That would be great
  5. S

    M-37 Starts Hard When Cold

    For some reason i cant get registered on the G741 Forum to see the float settings.
  6. S

    M-37 Starts Hard When Cold

    I have not pulled plugs out but plan on tonight.
  7. S

    M37 Acceration problem

    Can you tell me what the points Gap should be and what the float level of Carb should be. Right now the thing is setting in my headed shop at 60 degrees and it starts very hard cold. It acts like its flooding itself out the only way i can start it is have to hold my foot to the floor no chock...
  8. S

    M-37 Starts Hard When Cold

    Any ideas of why my 1954 M-37 starts hard cold. I just recently rebuild the carb and when the thing is running it run nice. Since i have rebuild the carb and adjusted the points to .020 it seems to me that it dont want to start when its cold. This thing is sitting in my headed shop at 60...
  9. S

    M37 Acceration problem

    Whats the place to check vacuum at on the manifold
  10. S

    M37 Acceration problem

    I did spray all gaskets around the carb with either had no leaks. I will get a vacuum gauge and report back.
  11. S

    M37 Acceration problem

    I have a 53 M-37 have owned it for 15 years. Hasn't been driven for a few years. When it was parked it had a dead spot off idle. I just pulled it out of the shed to work on it. I purchased a new carb kit from Mikes carburetors. Polished up the accelerator pump and the bore. Checked the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks