• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. A

    MEP years

    Having a real hard time finding it on Google. What year range did they make the 003/002 then what years did they make the 803/802?
  2. A

    MEP-003A hook up question

    That wire goes to the back side of the ground stud. There's only one wire on l0 and it's hard to follow do to how much stuff is in there. Is it going to be inside the electric box?
  3. A

    MEP-003A hook up question

    This one?
  4. A

    MEP-003A hook up question

    And the ground rod to the frame is also correct? All the threads talk about the neutral bond, but non of them have pictures. Is there a picture of where it is?
  5. A

    MEP-003A hook up question

    I just want to make sure im hooking this up correctly. I have it wired to my house panel with the interlock switch. Theres is 4 wires that go back to the generator (mep-003) The electrition was going to drive a ground rod and connect it to the ground at the frame. But Im confused about the...
  6. A

    Mep-003 exhaust.

    I'm planning on building a shed around my generator to power my house. I'm going to have to extend the exhaust out of the shed. I was planning on having a flex pipe inline and a rain cap on top. Is it fine to combine the two pipe into one? If so is 2.5" exhaust pipe fine?
  7. A

    Mep-003 won't continue to produce power

    It was rectifier bridge assembly. Bought a new one from a vender here
  8. A

    Mep-003 won't continue to produce power

    I sent the VR to him to get tested. It tested fine. before removing it i tried disconnecting #17 on the vr. it would produce high voltage with the start switch released. going to test the cvt1 next
  9. A

    Mep-003 won't continue to produce power

    But this isn't the oem VR. Is it the same procedures?
  10. A

    Mep-003 won't continue to produce power

    Yeah, thats going to be fixed. He hasn't responded to my email yet. Does anyone know the testing procedure for his board?
  11. A

    Mep-003 won't continue to produce power

    P59e is what's on the wire
  12. A

    Mep-003 won't continue to produce power

    looks like it came from 3 and goes to 12. thats how i bought it.
  13. A

    Mep-003 won't continue to produce power

    it will make 260 volts on its gauge, aslong as i hold the start switch. pretty much as soon as i release it, it drops down almost to nothing. wouldnt that be more so a problem with flashing the generator then it would be with the vr?
  14. A

    Mep-003 won't continue to produce power

    I thought he gave me a spare original vr but I guess not. Just sent him a email
  15. A

    Mep-003 won't continue to produce power

    I believe I still have the oem board. Pretty sure he said the oem board was good. He just wanted to upgrade and have a spare
  16. A

    Mep-003 won't continue to produce power

    It's the Lakeland board. I don't see a phone number so I'll email him
  17. A

    Mep-003 won't continue to produce power

    It will do it with no load, And with a small window unit plugged into it.
  18. A

    Mep-003 won't continue to produce power

    Yes. Engine starts and runs perfect. The stuff we load tested with got rained on, maybe it shorted something out?
  19. A

    Mep-003 won't continue to produce power

    I purchased a 003 couple days ago. He had it rigged up to some commercial heaters and acs to load test it, and it seemed to be making power fine. I go to try it here and it would produce power for 10 seconds then the volt and hertz gauge will drop down just about all the way. Every time I try...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks