Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I installed one of CUCVRUS' kickdown switches in place of mine that I broke (thank you CUCVRUS!)
My throttle bar still doesn't make contact, or just barely, with the switch's peg, and I know that it's mounted correctly. So, I think that the throttle either isn't able to move at full travel or...
Here is a stock photo of one. I broke mine taking it apart to see if I could adjust it. It is located on the go pedal bracket under the dashboard. At full throttle, the metal bar of the pedal assembly barely touched the switch. The throttle would have needed to travel about another 3.4 inch in...
I'm beginning to wonder if the throttle pedal is moving at full travel or not.
I'm hoping that someone on here could give me some insight as to how far the pedal is supposed to travel.
Sent from my Pixel 2 XL using Tapatalk
I noticed that the kickdown switch at the throttle pedal isn't being engaged, even at full throttle.
It moves freely by hand though.
What is the proper adjustment for that switch?
Thanks,
Kevin
Sent from my Pixel 2 XL using Tapatalk
I have unknown bucket seats out of a newer vehicle that was installed by a PO. It has factory gray cloth as well as side air bags in them. Where can I source the proper color upholstery so that I can have an upholsterer recover them?
Thanks,
Kevin
Sent from my Pixel 2 XL using Tapatalk
Hi all, I'm new here and have been doing a lot of searching, but can't seem to find the info that I'm looking for.
I have an M1009 with the stock 6.2. The steering box has four hoses -- two from the pump and two going to the master cylinder.
My understanding is that I would need a 2wd steering...
I drove it home Sunday about 50 miles. One of the u-joints was clunking. I took the rear driveshaft to a drivetrain shop yesterday to replace the two u-joints along with balancing. I already replaced the hood release cable -- huge difference. The rest of the work that I will do I'll post in the...