Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
looking to get an m820 from Sparta, Wi to Berne, In {south of Fort Wayne, In} My EUC was sent to Battle Creek today 9/24/2013 and I wanted to get an early start! I have had EUC's aproved before a couple of years ago. So i'm thinking it will be a month or more before it will be aproved. The...
I have A m944a1 and mine is a pain to shift to get the generator to engage! When you get it engaged you need to put it in 5th and pull the throtle out on the dash {to keep rpm up} to get the generator to kick in. good luck!
I also have a 002 & 003. just picked up the 003 a few weeks ago. I ran my 002 on friday and got my 003 going saturday to take over {I'm having trouble getting voltage on my main lugs on the 002}. the 003 will power my house & my machine shop :-D. I turned all of my 3 phase equipment on and the...
I have nothing but praise for Andrew. I was coming down to pick up some of my wins and he tryed to call me before I left. To let me know that my EUC had just been aproved for my trailer that I had gotten earler. I don't see any of the other ones doing that!!!!!!! {I had already left but I still...
I have had an air leak on my 5 ton since I picked it up. As soon as you shut it off it will go to 0 in 2 to 3 min. I heard it leaking through my air intake I have traced it back to my brake pedal. It's coming out of the relief hose. I tryed blocking it off {when i didn't know were it went} and...
The tent place that I am working with is curently making tents for the gov. They are making them tan and they told me they could make it out of the same stuff. They make polls too!When i give them the dim. they could give me a qoute, How is the tent atached to the truck? Is their steel rods that...
Need the tent sides for my M944a1 {need polls to, or dim. and picture of the tops} Does any one know where to get any? I would pay for plans if some one would have those. My local tent shop said they could make the sides if they had dim.
Any help would be welcomed.:jumpin:
I didn't get much with mine. What I really want for mine is the tent and polls. I am going to be taking mine to swap meets {Portland Ind. gas engine show}.
I picked up a M944A1 {newer verson with the allison trans. 1986} and I gave a little over 8,000 . Most of them have been selling {M944A1} between 10 and 15 for the running ones. I'll offer 6,000:D
I took the air line coming off the compressor today. Their's no check valve going to the air tanks so the air leaks right back through the compressor when it's shut down. Their is a presure relief popit going in to the first tank but no check valve. Any one know what kind of check valve I should...
aua I found out why it wouldn't shift from 1st into 2nd aua my rpm wasn't high enough aua I must have bumped my control on the dash. The rpm just wasn't high enough to shift. I feel abought this _ high aua Let alone the bill I got from allison repair man.... To the tune of 322.00 He did say...
Thanks Reb, I should have posted that earler {trans. MT654CR} . The air presure bilds up to 120 and stays their. It just takes 7 min or so to build up at idle and 2min to go to 0 after shuting off. I am going to try today to take the air line off if I have time. Thanks!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!