Search results

Okay, any tip on venting the air out ?

1 more..

imgs

Okay, il get some pics and see what you think, maybe i should change its location.

Down on the fender just below where the first batterytray would be if you have the original trays :P my m1009 has been torn apart modified and had alot of stuff replaced from a k10 blazer..

Hi All! My original filter assembly is bypassed since long on my m1009 and now theres only 1 in-line filter keeping the crap from the engine... I have an electrical pump fitted on the hoses to pump the fuel to the engine. Now to the question, il be adding a new filter assembly from a big...

Why hook up an extra bulb to show glowing in progress when you have one in the dash? splice n dice into that one instead!

hmmm okay, well my parksw is not working :P if i turn it off it stops where it is... Do someone know where to add power or ground just to make it wipe good? :(

So, still troubleshooting my wipermotor wich works really poor. I cut this out from the tms and have been trying to find out what should go where so that i can hotwire it to hopefully always work..... Some questions, 1. Park Switch solenoid, what would this do while in park? 2. Washer...

Its really easy to drop the starter yourself. 2 bolts under it and 1 on the back bracket (if it still has it, mine dont). If i remember correct the bolts are size 15 on a wrench. You can also really easy check how much power you have down at the starter without taking it down with a multimeter...

Ive had the same problem, no lights/turn signals. The fuseholder for the 30amp fuse for the ligths had gotten "soft" not holding on to the legs of the fuse too well.

wow, sundsvall :) No, I dont think they did :P Thanks for your input everyone!

Yesterday I confirmed what i previously had seen... The fuel filter on the firewall is bypassed. Fuellines have been extended and connected to a fuelpump. http://www.vehicle-wiring-products.eu/VWP-onlinestore/hoses/photo/67312.jpg <-- this one I guess this means that the stock pump has given up...

Im about to change the engine oil in my 1009 for the first time. I have no clue what it has been running in previously. Is there something that is always good to use or might i destroy my engine by using the wrong type of oil?

Its probably just a new cable from the one of the batterys positive to your positive side of the glowplug relay. I have done so in my truck, leaving the starter @ 24V only.well I also have 24V bulbs in for some extra light :) and no problems with the resistor pack. I also have a manual glow...

Hi, Thanks for the reply. I have been troubleshooting it for like 5 hours :P i want a new one!! :) ive taken all the connectors apart, cleaned then with elictrical cleaner checked that they are "in one peice" with a multimeter.... Also, the prevous owner to my truck has fiddled with...

edit, m1009

Is it the same as for the civy k5s from 84 ? Is there a parts number ? Its been really bad latley, wiping, not wiping... i bypassed the supressors and that didnt help,arms move somewhat when I help them going but winter coming up i need a stable solution. Best Regards

hmm, so one would have to lift off the cabin from the frame?

Thanks OK thanks guys, i guess the person who converted the truck never wanted it to be found :(