Search results

M939 hard top, steel vs. fiberglass. I'm looking to put a hard top on my M923a2. I'm trying to find a steel hard top but there's not much out there. New tops are $3000 + which is more than I want to spend. Does anyone have any experience with fiberglass tops, fit, cracking etc.

Just painted the wheel and put new o ring and stem grommet in. Still hear a air flow sound rushing into the hub. I will disconnect the ctis line in the morning. Can a bad ctis wheel valve back flow into the hub?

I'm having an issue with the tires leaking down M923a2. When manually filling the tires I hear the sound of air rushing in the hubs. The air rushing sound lasts for about 10-20 minutes. Last summer I would also hear this noise after shutting the truck down. Is this a normal sound, are the wheel...

Mine was leaking from the same area. It was in the upper eighties, drove it for a half hour and it left a small puddle under the axle. I didn't get to look at it for a couple of weeks, when I loosened the breather the air was still under pressure. I have since put a tube breather on it, no...

The truck has been sitting for two weeks.I checked the axle breather before replacing the pinion oil seal. Upon loosening the breather quite a bit of compressed air was released. I'm hoping the the stuck breather was possibly causing the oil leak.

I was hoping someone would have the part number M923A2 rear axle oil seal for input/output shaft. We've have Motion Industries locally, but I need the #. I'd like to get the part before tearing into. Greg

Lookig for some info. Is the pintle height of a M923a2 to high for a M105A2 trailer?

Thank you for your help. Greg

I've got the boom and the roller. I guess I'm asking about the chain hoist.

Where can you find these at?

How is the boom for the spare tire used? I have done searches but could not find info on this. Do you attach a winch/chain hoist to it to raise and lower the tire? Thanks, Greg

Did the military ever use fiberglass hard tops on the deuces or the 5 tons? I met a guy that an 813 with a glass top and claimed the military used them. Where these rebuilt with these?

I use the plate that the sockets are attached (welded) to and the socket.

Hi, I am having a problem with the right front turn directional not working. The other three corners are working fine. I tried swapping bulbs, checked connections etc. The marker light works fine on the light assembly so grounding there should not be an issue. I checked the voltage and found...