Search results

Need some pics/ideas on how people that have put a turbo on how you did your crossover pipe. Mine is all set and running but the crossover pipe hits the front drive shaft so I took it off for now but I want to do some wheeling. I dont have money for a lift now so woundering if there is another...

So my gear reduction box on my M1009 is toast, went to a dealer to try and find one. Does anyone know what the part number is or the ratio is the dealer found 3 choices .9444 code (w), .9744 code (d) or 1.3000 code (BH)

Just started to paint the m1009 decided to go a different direction and try digital camo. I like the way it looks just getting started, what do you think. Ps don't know why the pictures are up side down sorry.

So I stepped on this while the head was off and need to know what sensor it is. Its on the drivers side head near the fire wall. I think its a coolant sensor but when I check the local auto stores the coolant sensors they have don't match up. I also check this old shop manual and cant find it in...

So heres what I have done. I got a 6.5 turbo, intake and exhaust manifold for 250$ off a 95 hd chevy. Took off the heads and put new felpro .10 bigger head gaskets and felpro head bolts from advanced auto those where like 85$ for both. Went on ebay and ordered an oil supply line 26$ and got some...

Where did you route your turbo supply lines. What size line and what length? And where did you get it from? Thanks pictures would be great!

So I just replace my master cylinder on the M1009 because it was leaking. I bench bleed it and bleed the brakes but my brake light is on on the dash and the brakes are a little spungey. When I bleed the brakes hardley got any fluid out of the back, I bleed the system twice and a lot of pressure...

So just pulled a turbo and exhaust manifold from a 96 3500. I would like to know what head gasket people would recommend, do you get the .10 over 6.2 gasket or go with the 6.5 gasket? I was looking on the interweb and is the stock gasket rubber? Ive also seen copper and steel gaskets whats the...

So Ive been looking around at many junkyards for the past year for a 6.5 turbo setup with no luck, so yesterday at work I remembered I have an old 3800 supercharger in the garage. I have a 6.5 turbo intake manifold and could get a cnc shop to build a spacer to mate them together. Been searching...

What is this part? Its attached to the speedometer cable and goes into the transfer case. I looked in the TMS and in the civi manual cant find it theres a part that broke on it not shown that screws into the transfer case also how long is the speedo cable 100 inches ? for the m1009 oh and if you...

So I drove my m1009 to work today 111 mile trip drove fine for about 80 miles then started acting like it was running out of fuel the gage showed about a 1/4 tank so i stoped and got 7 gallons back on the road and same thing started to lose power could only get up to about 40 mph on the highway...

Hi, just so everyone knows I did try and search but did not find anything that applies. Ok so just got my m1009 registered took it for a drive yesterday and drove fine for awhile then it died on me while driving, started it back up and it did this several times. So I changed the fuel filter...

Hi everybody checked out this site a few times finally decided to become a member anyways I own a 86 m1009 just bought it this Feb. and am in the process of rebuilding it.