Search results

Thank you all for the help! It was the transmission plug! Now to track down the fuel leak and why the oil pressure Gauge isn't working... Going to spend some time with the technical manual

I'll go seeif I can find a tag on the wire and I will get the specific model number. Thanks all for the quick replies!

It is in the same group with the oil pressure sensor it appears.

Any idea where this plug should go? Just got the Humvee and starting to look it.over.and this was hanging down..

How would I do that? Not familiar with a quill shaft.

Ok, took head back out. It moves and returns freely. I did pit a pencil in the top by removing the bolt and cranked before removing. I could feel it going up and down. So, any ideas what next? Still have it out.

I avoided it like the plague, was a last ditch effort to see if it would even fire up. I am guessing it was a bad rebuild then. Will call the shop monday that did it and see what they think. Thanks welldigger. I am going to look around for a used HH.

Okay, took it out again. Quadruple checked everything. Put back in. Nothing. Started with ether. Ran (louder than normal) but died when ether ran out. Took bolt out of center of head and it did not move a stick. Is this a result of a bad head rebuild? Facts: Fuel to the head is good...

Ok, I know that part and I see the concept. I am just not sure how to tell it got in the right spot. I have put it all back together and tried moving the fuel rod around in a few different ways but no luck. I am going to step away... again... and try again later. I am so over this/......

I am not sure how to check that. I just made sure it slid tight

I am not sure warthog. I am not familiar with how to check that.

Does this button look right??? This is the button Delco Diesel put on my HH when they rebuilt it. Just noticing it looks different from pictures others are posting....

Also, freely getting fuel right before the HH.

Took the head back out to make sure button was on and it is. Before removing, I opened the injectors and broke the return on #6 and no fuel. The cutoff lever is free and returning to the 7 o clock position. Any other ideas?

Pulled head to ensure marks were lined up and that is all good. Turns over, smoke comes out, not start..... Any other ideas? Was running before, just shot all the fuel into the block. News seals on HH stopped leak. Now what? I am so lost...

Place that rebuilt the head gave me the seals. Brought home, put on, no more leak through shut off area. Now it won't start though.... I cannot imagine what it is now. Changed oil and filters, turned over but won't start.

Thank you! Ill stay in touch!

Anyone know who could work on a deuce hydraulic head east of OKC? I had the injector pump rebuilt but put it in and am getting fuel in the oil now. I am just not a good mechanic. Period....... Took the cutoff cover off and fuel is leaking with the in tank pump turned on so I am assuming it is...

Thanks for the help all!

Thanks gimpyrobb. That is my plan after finding a few threads. Hopefully I can find someone in my area selling the parts and someone to put them on... I can or will mess with a lot but that job does not look fun....