Search results

I have never had one walk around on a concrete pad but I used a stall mat from the local farm supply to make isolation pads to go under the skids I also used pieces between the skid and lift rings to remove the vibration rattle noise from them.

Get a 24v to 36v 100 watt solar panel and charge controller and mount it next to your unit and use it to charge the batteries. You can still use the exiting charger for desulfating. You may also want to check the diode on your alternator. Take your batteries in for a test or buy a tester. I...

They are really just desulfators. They only supply a few watts of power. I put a dual 10 amp battery charger in all the units I sold.

I just use the individual flap style terminal covers.

They should be sued.

In old days they hung tapestries in churches and castles to reduce sound reflections in a room. I have seen large moving blankets on walls and wool used the same way. Now you can buy modern scientifically designed sound panels that are designed by a team of engineers. I am an engineer, just...

Since you have a hotel you probably have a lot of bad towels / linens. They make great sound absorbers for your generator room or any noisy place. You can use fire retardant materials to cover the frame also! See video.

What about duplicating the ASK kit. Shouldn't be that hard to do if someone has some specs for one.

I may have a couple gallon cans of the poly based CARC left in green. I know I have brown, black, and grey primer. It takes a gallon to put a light coat on an 803. I prefer a nice enamel paint instead with a slight sheen. Everything looks better with a little shine lol. Any bare spots use...

I think I will raise my 803 a little more off the ground. It is only 4 inches now and I have to use a pan to catch the oil which means cleaning away the mulch to get it low enough. I will crane it out of the way an mound the dirt up more then put the Do you have a parts list for your fuel...

Nice job

I am stripping what is left of my 500mcm and 1000mcm cable to save for when copper goes up in price. I used 300 feet to connect a 400kva gen set to the distillery next door. Used my pickup to pull the cable thru the conduit! It was fun laying out the cable by myself to get ready for the...

Has he removed the front cover and looked at the tank / fuel pump? If the unit is working until prime is lost then there has to be a leak. Does the aux fuel system work?

I install bulkheads every day in rain barrels for my wife's store. We buy them by the hundreds. Same technique. Concrete wire with a loop on the bottom to prevent the bulkhead from coming off the wire. Use Permatex 80631 thread sealant with PTFE on your fuel tank bulkheads since it is fuel...

I get great service from these folks! I purchased 50 from them again this year. Installed 10 bulkheads Monday on 5 80X's. I made up a few pull wires using concrete reinforcement tie wire that I use. I also add a stainless oil drain pipe to hose barb adapter while I am at it. I will never...

I purchased some steel round stock from Anniston Alabama back in 2014 and never got around to using it. Looks like a readable PO number. I hope it is Pyromet 355. Now that I have a project to use it in I need the Mill Cert to verify or I have to go out and buy more. Please PM me if you can...

Never had an issue with aluminum alloy rivnuts. Aluminum is best to prevent galvanic corrosion. Use aluminum alloy bolts or high quality zinc plated steel to reduce galvanic corrosion. I get mine from a NASCAR supplier in Charlotte NC. I have installed over a thousand in MEP-80X generators...

I just hard wire in a pulsetec dual charger and keep it hooked up all the time. It works better than just solar as it will top off the batteries if needed and does constant conditioning 24 hrs a day unlike solar. I just mount it in the accessory box.

https://www.northerntool.com/shop/tools/product_47661_47661?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Farm%20%2B%20Acreage%20%3E%20Farm%20Utility%20Trailers&utm_campaign=Farm-Tuff&utm_content=125415&gclid=EAIaIQobChMIh_jegab25AIViJWzCh24qQ6zEAQYAiABEgKfdfD_BwE I have 2 sets of...

My old auto parts store warranty was 5 years, 5,000 miles, or 500 feet. Which ever one comes first. Just about as good :)