• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. P

    68 Unimog 404 Restomod

    It looks like a lot of water sat in that tank for a loooooong time. the filter you shared earlier, and the amount of calcification on it was an omen. The rear tank is perhaps in the same condition.
  2. P

    68 Unimog 404 Restomod

    Saw this on Ebay today https://www.ebay.com/itm/266950053097
  3. P

    68 Unimog 404 Restomod

    Your fuel filter shows an incredible amount of calcification, probably due to the amount of moisture in the fuel system and tanks. As well, that is the early filter. The late filters are the only ones available which require a newer cannister. The cannister shown has the old thick lip. Get a...
  4. P

    68 Unimog 404 Restomod

    If the distributor was incorrectly installed, perhaps you should also determine the valve-camshaft timing at the same time. Follow the instructions in your manual about valve timing. The notches on the camshaft and cam bearing should align when you are at TDC. This will make feeling for...
  5. P

    Unimog 404 pulley belt tensioner

    California ? You may be thinking of UNIPASER perhaps?
  6. P

    Unimog 404.1 with pertronix ignition, and coil

    The Pertronix unit should be the UM161. It is made to accomodate a 24V power. There is a newer version, the MV161 as well.
  7. P

    Two new toys unimog 404

    "Ought to" could be taken relatively. Many a 404 transmission can exhibit this type of behavior. If all else appears ok, it could be due to: the doghouse cover itself being "tweaked" and not seating properly; the gearshift lever and force transfer through the vertical pedestal on the...
  8. P

    Pizza Cutter wheel size

    The factory rim size for the 404 and other German Bundeswehr vehicles and trailers is/was the 9x20. This size is stamped directly onto the rim and was designed to accomodate the 10.5x20 tire size you refer to. Major manufacturers for this rim were SUDRAD and Lemmerz. If you ever find a...
  9. P

    Two new toys unimog 404

    Now all you need to find is the comm enclosure that goes with it ! The had but one entry point in the rear and an internal Eberspaecher heater on the front wall. Nice unit.
  10. P

    Two new toys unimog 404

    You have what appears to be an example of the extremely rare version 11 cargo bed. It was equipped with hinges for sideboards and a central tube like the radio (Koffer) bodies. The platform had an additional four "latches" to accommodate a military communication shelter.
  11. P

    62 404.1 Swiss

    Valve adjustment "kits" I have not heard of. You only need the appropriate 14mm purpose-designed MB or Hazet wrench. They are becoming hard to find, and yes, expensive when you do. You might try Unipaser or EI for a loaner
  12. P

    62 404.1 Swiss

  13. P

    62 404.1 Swiss

    You're on the right track, so to speak. First, get yourself a timing light and adapter (if you have the military shielded wires) and use it. Two: adjust your valves. Three, INSPECT and clean, if required, the distributor counterweights under the point (Pertronix) plate. Next, register your...
  14. P

    move to north carolina

    Anyone heard from the old grouch lately? Phones are always busy and emails aren't being answered. Is all ok there ?
  15. P

    Identify this German WWII vehicle

    It is a Adler passenger car with a sheet metal skin for use as a mock armoured car. They were used by the Reichswehr during the interwar period and, based on the photo, perhaps the early Wehrmacht, circa 1933. The Werner Oswald book documents it. The book title is an impressive Kraftfahrzeuge...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks