Search results

Hey All, My truck was originally a non turbo LDT truck and I added a turbo on a few years back (never retarded timing). Now I was reading that not retarding the timing could hypothetically get more horsepower but I am wondering if that is really true on our trucks. Currently monitoring my boost...

Hey all, Was doing some general maintenance and when looking at my injection pump it seems the fuel adjusting screw is completely missing or went in? Has this ever happened to anyone before / is there an easy way to get it back out? Truck has been running ok although a little bit sluggish up...

Hey guys I am having a strange issue. Truck starts great when cold quick blip of the button and it fires. When warm after a short drive if it sits for a few min and I come back it takes a few cranks to get it to fire. Any ideas? It's completely stock minus fdc bypass.

Hi All, So I have had my mep002a for a few years now and its been pretty great. After the last storm we had here i noticed my injectors were acting up so i had them rebuilt and cleaned out the fuel system. Any how it was still acting up bogging down under full load 7000 watts about, so I tried...

Hi All, Just quick question is it normal for a mep002 to blow air out the oil fill tube when running if I open it? Thanks, Mitch

Hey all, Recently had my air horn solenoid die. Checked all. Wires and verified ground was closing correctly with horn button and hot 24v at other wire. Problem is as soon as I plug in the hot wire it goes on even if I don't plug in the horn button wire from the column. I played around with it...

Hey All, Recently just picked up an mep002 was kind of in rough shape but i have it running now. Voltage gauge is showing 120 but problem is when i try and plug something into the plugs i am not getting any power? Any ideas where i should start? Do you need to have the HZ gauge hooked up for it...

Hey all, Just recently picked up an mep002a. Wondering if anyone knows what these 3 wires are for? I assume 2 go to the starter but can someone pinpoint me which one goes where? Also how do the fuel pumps ground I have a positive but no negative or looks like does it just ground by the mounts...

Hey Guys, Not sure if its an issue or not but I get gray smoke at idle whether warm or cold doesn't change doesn't go away. When i accelerate or move it turns to black/brown which i know is normal. Is the smoke at idle normal or something wrong i don't recall it normally doing this? Notes: I do...

Hey all, Wondering if anyone on here has tried / been successful with making a inexpensive gun ring for the m35a2? Would love to see pictures / designs of anyone has them! Thanks, Mitch Sent from my SAMSUNG-SM-G890A using Tapatalk

Hey All, So I just went through the process of rebuilding the transfer case recently on an m35a2. Got everything back together and have been driving around I notice the gear lever moves around in high range while driving (when I decelerate / bounce around). Its not popping out of gear or making...

Hi All, I am rebuilding the input shaft gear bearings on my m35a2 and just want to be sure i install them back correctly. When installing them do the bearing shields all face toward the back of the input shaft or do they face the inside of the gear? Thanks, Mitch

Hey All, Started rebuilding my transfer case after a both bearings on low gear decided to spit out all the ball bearings. Question is on doing this it appears to have demolished the spacer that goes between the low gear and bearing and I can't seem to find anywhere to purchase itaua #15 shown in...

Hey All, I am getting ready to flip my hubs to put some super singles on and have a few questions that I couldn't seem to find when looking through the TM's. 1. I am new to the split wheel / locking rim type wheel do i need to deflate before i remove from truck or is it safe to remove from truck...