Search results

We got it running the check valve in the return line was clocked came out in pieces put in a new one cleaned out all the lines with air primed it started right up

Yes I'm thinking it is a valve at the return line and it is not allowing to build pressure

Excellent and if that valve in the return line clogs will it keep the truck from running also do you possibly have a diagram of that or a picture

I am having a similar issue I have talked to you a couple texts at caterpillar does anyone know if there is a return fuel line off the head on the A3

Yes I changed that with a new one I'm not 100% sure why the truck died at idle but it has been two months and now has fresh fuel lines check valve at the tank rebuilt the transfer pump new water separator and fuel filter I am wondering if we might have one of the valves in the transfer pump...

It has fresh fuel the transfer pump was just rebuilt new fuel line new water separator new fuel filter new check valve at tank and I'll check valves in the pump including piston replaced fuel is clean no algae in tank can't figure out how to get it to Prime

What did it turn out what's wrong with it my truck did the same thing 2 months ago and I still have not figured it out I have replace the check valve the main line going from the tank to the pump fuel filter water separator the two valves Inlet and Outlet at the pump and also some old rims for...

I don't think that affects the 3116 because it is a gear driven pump the only electronic is the water heater and the fuel shut off solenoid

Okay and that was on the caterpillar 3116 did it die while it was running and then not restart except for starting fluid

I have a 1999 M35 A3 I have had it 5 years it was running just fine and then died at idle and I cannot get restarted I ordered a one-way check valve that was not correct we have replaced the fuel line the two valves in the transfer pump that you big o rings and have Prime fuel all the way to the...

I checked with Eastern Surplus Erics Military and Boyce Equipment and they all said the a2 frame extenders will fit into the a3 its just a different winch set up my whole purpose of this is I'm going to mount a 24 volt Warn electric winch but I need the extenders to move the bumper out enough...