Search results

Wondering if anyone on here has ever run regular truck tires on the 20” steel mrap rims. Looking at putting a set on my super duty with hub adapters obviously but not sure if I can run a standard E load range 37 on heavy duty rim. I figured if anyone would know it would be this group. Thanks Matt

First off sorry for all the new threads here lately, new to the comm gear if ya'll couldn't tell. I got a new set of headsets but the foam that holds the speakers is deteriorated. Has anyone found a good source for replacing the foam? like from a different civi headset or bulk foam or something...

Hi All just starting to build my vic-1 system. Purchased my AM-1780 but need pretty much everything else including cable. Looking to set up a 2 man but eventually probably 4 . Does anyone have good sources for components? Crew Stations (C-2298, C-10456, or C-2297), power cable (CX-4720)...

Does anyone know of any military radios that will broadcast on "CB" frequencies (26.965-27.405) i believe the german SEM-35 would work but any easier radios to find? looking to run a "military" looking radio in my hmmwv that can work as a CB

Ok so I finally got to test out my run flats not by choice. I'm trying to decide what tires to go with as I do go to a lot of off road events. Which tire do you all with experience suggest. The Bfg Baja t/a the Goodyear MTR or just the Regular Radial MT?

All four of my differential output seals are leaking and I need to replace them. There seems to be play in the output shaft also when I wiggle the CV shafts so I assume that the bearing are also bad. My question is has anyone replaced these bearings and can they be replaced with out removing the...

I was Dying at this so I had to Share with everyone... Might only be on the A2 though not sure. https://www.youtube.com/watch?v=qnB5E6YIwxc Thank you to the guys who made this.

I hate to be lazy but I've been thumbing through the parts TM's and have't been able to find it and I'm sure someone knows right off the top of their head. What is this strap behind the driver seat for? Many thanks

Hi I was wondering if someone could tell me the overall length of a four man hand rail for the soft top. I have 2 sets of two man rails and plan to combine the two to make 4 man rails. They seem close but i may need to extend them a bit. I just wanted to know the over all length so that I know...

Does anyone have any pictures or know what the original style tach mount looked like and where it goes on the M998. I know of the mount that goes on the upper windshield but was looking at the other option for mounting the tach in an original location thanks !

Does anyone know if there is a TM or guide for repairing/disassembling the hmmwv starter ?

Hi I was wondering if anyone can tell me the dimensions of the Cargo cover bows for the 2 man cargo cover. I am getting a cover but don't have the bows I was just going to bend them out of conduit. I think 3 are one length and front is a bit shorter. Was wondering if anyone had some dimensions...

Has anyone fabed up any rock sliders or rocker protection. I was doing some research and saw jack reinforcement rails which may work but was looking to see what others have done to protect their rockers and posiably protect the floor also. I know they make ones for civi h1's but kind of...

My lift pump has started to leak externally. Any reason I shouldn't just run a civi lift pump with out the vent line? I'd like to grab one today just wondering if I'm looking at problems running one with out the vent or if there is one probably available locally. I'll just plug the line where...

Has anyone replaced the input seal on their saginaw steering gear and happen to know the part number. I'm going to do more digging but wondering if anyone knows off hand. Thanks, Matt

Hi all so I have a quick question as I've see two different numbers for the harmonic balancer for my HMMWV. I have a '92 with a 6.2L. The part numbers I have are 14022671 and 10154688 do you know which one I need for the 6.2? Thank you in advance for your help. Also do you happen to have the...

Hi all so I need to have a running and driving HMMWV shipped from Damon Texas to Rochester NY area. I'm wondering what to expect for shipping cost. I've gotten quotes anywhere from $700-2500 so a huge spectrum. I would like to stay in the 7-800 range. I am willing to meet transporter somewhere...

Hi all I'm new to the HMMWV scene and have dreamed of owning one as long as I can remember as Im sure many of you have. If all goes well my dream will be coming true soon. I'm sure ill have tons of questions but I have a history question as I am very interested in the history of the vehicle. Can...