Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Tested all my gauges and most of them work [emoji23]... but in all seriousness I been keeping an eye on the batteries this whole time. Been to Cabo and back with the same alternator. If they weren’t charging I would still be in Cabo lol. It works perfect. Just have to try it out if you don’t...
I didn’t change a thing ... I still get the charging system light in the dash but the system is charging fine. The light is from the load and battery control box.
Sent from my iPhone using Tapatalk
Complete plug and play. All I used was the 12/24/Ground leads already on the truck. Been running that alternator a few thousand miles already with no electrical issues. The fact that’s off-the-shelf parts, it can be rebuilt anywhere in the world. You can’t do that with the original alternator...
Yes. If you change the CTIS to an LMTV model it will change the tire pressure. Rides much better with lower tire pressure too
Sent from my iPhone using Tapatalk
Give Ron from Double-alt.com a call. Much cheaper replacement dual charging alternator than the originals. The alternator is made from common alternator parts that can be change/replace/fix by any alternator shop. We have over 2500 miles on ours and still running strong. The current output on...
Call it a bad short or what but I had to disconnect and reconnect the oil sensor and it started right up. Not sure why it did what it did but thank guys for the help.
Sent from my iPhone using Tapatalk
I did an oil change on my M1088 and I can’t seem to get it to turn. Before, I always noticed that I needed to see the Engine Oil Pressure Light on before I would let me push start. After the oils change I can’t seem to get Engine Oil Pressure ... please help, what am I doing wrong?
Sent from...
The originals were used. But in case some models have different bolts it shouldn’t be hard to source new bolts for it.
Sent from my iPhone using Tapatalk
Not sure if anybody has done this. We needed to pull a normal (non-pintle hitch) trailer with our M1088 that we made into a flat bed so we came up with this hitch design. Just add a drop hitch and you are good to go. Anybody interested in one just let me know. Not sure if it would fit an LMTV...
Works flawlessly. The only regret is not finding Ron from double alternator any sooner. I bought a replacement original and it didn't last either. If you are having problems with your FMTV alternator the double alternator from Ron is the way to go. It's built with off the shelf parts so it's...
Yeah around 55 or so. I will look at the alignment. My old worn tires never gave me any trouble. I changed them and now I get this shimmy
Sent from my iPhone using Tapatalk