Search results

I ended up using bulb type rear lights and leds in the front worked--

I could not figure it out--tried everything--also happened on other humvees I have--Ended up using leds in front and bulbs in rear and that worked-----I just got some more humvees to play with so will try leds again--If I get them to work I will post what I find

I have the exact same problem on three humvees----Tried everything you did and spent hours--Had to get rid of the rear leds and went back to standard rear lights--Good Luck

I had a few of them--I remove the injector and I remember i could see the tip --put the needle nose on the tip and poke it free --I think i used a skinny Philips head screw driver and knocked the tip through the glow plug hole with soft blows with a hammer--no mystery--

I pulled the injector and I think the tip was sitting on top of the piston--I used a harbor freight borescope to see in there--I used long,thin needle pliers to pull it out--Had another tip that broke off in the and got it out same way--injectors come out easy

I have sold a lot of military trucks and other expensive items--and if I was the seller of this truck I would be offering you the choice of all your money back or repairs of whatever you list--Dont let them set the rules--Let them know exactly what you want--You were misled into thinking you...

looks great--good luck

Tell your girl friend--Great Job!

It looks good--I bet is runs great--good luck

Its cheap to ship in the container--$1200 Newark NJ to Germany--They are usually loaded with a long fork lift--Its amazing they do not bounce around during shipping--nice pictures

I bought a bunch of thoes Florida titles for the humvees--the titles were laughed at in NJ motor vehicle--to get my money back I delt with iron planets legal dept--sent them the facts and they sent me check-----that worked out well---put in 2 valid claims under the IronClad Assurance and was...

Thats it Simp--thanks for taking the time to post it--George

Thanks simp. The valve i am working is the valve in front of the t cass with the arm on it. Do u have info on that one. George

I have a M923 that has a big air leak at the air valve on the front of the transfer case that engages the front axel --when I try to engage the front axel it just leaks and the axel does not engage--I can not locate any of these for sale--What is the name for this valve and who might have these...

I did take pictures along the way and marked the injector lines--easy to get lost--I used steam pipe thread sealer on the intake bolts--bought the stuff from home depot--The sealer worked great and the bolts went back in smooth--With the pump removed you can clean and paint the valley---

I use Diesel Care on ebay--pumps came back looking like new and worked--Super cheap--around $300---job was 2 hours off--3 hours on--I work slow

I have a 1997 ecv--same situation with the led lights--I removed the bulb from the turn signal switch and all led lights work now even with the head lights on--also noticed the turn signal switch has the ground and power reversed going to the bulb so that an led bulb will not work on the turn...

600 mile truck-- completely clogged --600 mile truck--inside of return line was rusty and the diesel turned to sludge--disconnect your fuel return metal line and run the return line from the injector pump into a 5 gal pail--see how it runs--

I had a similar problem--the fuel return line to the tank was clogged-- had to replace the line and it then ran well