Search results

I don’t believe it’s anywhere in the TM. I just lined everything up marked it and drilled. You can only set them so far forward otherwise you can’t bolt in the top of the bracket. Also you will need to relocate the tie downs for the back curtain

Thanks, is there a good source besides epay for a new regulator?

I just did this, the part that takes a while is torquing all 24 bolts to spec, make sure you follow the tightening sequence in the manual

Installed the dual voltage alternator and when I get on the gas (after startup and glow plugs cycling) the voltmeter pegs in the red then back to green every couple of seconds. I checked with a multimeter and I am getting anywhere between 24-30V on the 24V output and 12-15 on the 14V output. I...

If you draw additional voltage won't it just pull from the battery?

If it exceeded 50 amps would the draw just pull from the battery?

Wouldn't that amp rating only matter if I'm pulling directly from the alternator ? If I tap the 12v battery wouldn't I only be limited by the amps in the battery?

With the duel voltage alternator is there any need for a battery equilizer?

Looks great, did you just cut the door or did you add any reinforcement?

I assume you mean the ground on the back of the buckets under the hood? If so yes, if there's another ground let me know.

Installed Trucklite LED headlights (NSN 6220015479043) and tail lights today plus a new Trucklite flasher (TL part#97315) and everything works except for the right headlight(standing in front of the truck). I have switched the units around to make sure it's not a faulty unit and checked all...