Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I must say I'm leaning toward a C-7 engine A1R truck after discussions with some who own them. I understand the potential failure points of 'intermediate' electronic injector pump tech. I think I can manage the failure points on the C-7 adequately with on-board spares to make all the latest...
I’m moving forward in a search for a 3126 1079A1. Possibly an A1 1083 if I can find one. You boys have been very helpful in this process for me. Thanks to all.
I chatted with Bryce above in the thread on Facebook messenger earlier and he says he’s installed Detroit lockers on LMTV front diffs on 10 different trucks. He says the trucks drive on the road and off-road and they’ve had no problems and good results. That’s pretty encouraging.
🤔… I was thinking this was the case. I guess the rear locker should help. With the weight and ground clearance just pulling one of the front wheels in a loss of traction situation must be enough to get through. An air or E Locker would obviously be desirable on the front diff.
Thanks for the...
All,
In my research leading up to a purchase of an LMTV I have been reviewing the axles as set up OEM and I can’t find if they are open axles or limited slip. In looking at so many adding Detroit Lockers to the rears but doing nothing to the fronts I’m guessing these trucks have open...
I tried to PM you, but ran into some difficulties in the software, maybe I need to be a paying member here? Any case my cell is xxx-xxx-xxxx. I’m down in Galveston. I’d love to chat text me as fuzzy toaster… 😎
Mark Magee
Paddle Surfer, Vet, live in G-Town. Was a Pilot once (Strato) Mostly surf Surfside Beach. Years ago, I used to make the run down to Mansfield from corpus all the time. I will definitely be running the beaches in my future rig.
Thanks, have you found OBDII port useful in troubleshooting the ABS light? Also if you could give me a pointer to the trucks for sale you saw I would greatly appreciate it. Thanks.
All, I’ve been lurking here for almost 10 years now. I’m finally approaching actually buying an LMTV to build out as an Overland rig. My objective is to also pick up one of those single axle 17 foot LMTV trailers that will go with me most of the time. I live on the Texas coast and will be...
All, I’ve been lurking here for almost 10 years now. I’m finally approaching actually buying an LMTV to build out as an Overland rig. My objective is to also pick up one of those single axle 17 foot LMTV trailers that will go with me most of the time. I live on the Texas coast and will be...
Hi all,
Great forum, I've been a lurker for some time. I am former USN (Amphibs) and have decided to follow a friend of mine in the Houston area in getting an LTMV, he's been quite helpful yet I have one question: Should I definitely get an A2 model, or are the earlier years OK, that is were...