• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. yertnamreg

    Dewey Battery Charging Aux Power Unit - Generator Head Swap

    I doubt you would be able to get the full rated power out of this head, but there's no reason it wouldn't work that I see. Just check the dimensions: https://www.meccalte.com/downloads/s20w.pdf You could just put a breaker (which you should put on anyway) on the output to limit the power...
  2. yertnamreg

    Dewey Battery Charging Aux Power Unit - Generator Head Swap

    You're looking for something with a J609B flange. I'm guessing due to the pandemic supply is rather constrained. I was able to find one that should work: https://www.brandnewengines.com/S20W-110T.aspx
  3. yertnamreg

    Axle Shaft removal for towing FMTV

    I made a vidya about pulling driveshafts. Hope this helps people :)
  4. yertnamreg

    Bumper Number/ chalk markings decode challenge

    When I got mine it had a similar "Do Not Run" chalked on it, even though there was video of it running in the auction listing. After I got it, I found the engine and transmission were fine and the reason they didn't want it running was because the truck had no brakes.
  5. yertnamreg

    Steering box failure / cracking

    Any thoughts on his A/C setup? My concern is that the power steering pump will go next due to the increased load, but I'm not a hydraulics expert.
  6. yertnamreg

    What have you done to your FMTV or LMTV today

    Gave my girl a new smile ;) and a lot more air to the radiator. I got the skid plate when I purchased the cab from a GL auction. Had to cut the bumper a bit to make it fit.
  7. yertnamreg

    Cab Air Bag Bushings

    Got the Delrin. OD is a perfect match. As the product page states, the ID is a little undersize so you can drill it out (still need to do that). Looks like this is a great replacement for those $22 a piece bushings. The rod with shipping was $17, and I have enough left over to make several...
  8. yertnamreg

    Cab Air Bag Bushings

    I bought some delrin tube from McCrapster... P/N 8627K229. Will let everyone know how it works tomorrow.
  9. yertnamreg

    Cab Air Bag Bushings

    I'm doing my airbags right now, and like some other's experience, the bushing fell out in pieces. I called Ohio Hydraulic who called PP and they say they don't have any of the bushings (PN 2010000272). Does anyone have any leads on where to get these? I'm sure I could get some machined in...
  10. yertnamreg

    New MTVR Forum on SS

    Yup
  11. yertnamreg

    Lmtv a1r door lock key?

    I bought key's from here for my cab. Super cheap and easy and they work great: https://www.easykeys.com/TriMark_TM201-TM250_TM202_Key_Lock.aspx
  12. yertnamreg

    lmtv glad hand

    I don't remember any plugs in it, just a brass "foam" air filter on one of the ports. I have a 2009 model cab sitting on a 1995 chassis.
  13. yertnamreg

    lmtv glad hand

    I have the integrated unit, but I was referring to the protection valve on the rear crossmember.
  14. yertnamreg

    lmtv glad hand

    Guess my trailer protection valve needs rebuilt haha
  15. yertnamreg

    Starter solenoid

    This isn't the same part, but it is electrically compatible. Mounting holes are probably different though: https://www.digikey.com/product-detail/en/te-connectivity-aerospace-defense-and-marine/LEV200A5NAA/A101172-ND/2362828 Looks like Ametek makes it, but they probably wouldn't sell a single...
  16. yertnamreg

    lmtv glad hand

    Maybe this is a difference between the newer cabs and older cabs. I have an A0 chassis with a A1 cab on it. The newer cab has the two valves in the integrated module. That said, I'm inclined to believe NDT. He's a very knowledgeable guy on these trucks.
  17. yertnamreg

    lmtv glad hand

    I believe you're incorrect. I've used a gladhand emergency tire inflator just fine with only the trailer brake knob depressed.
  18. yertnamreg

    tie rod ends cross out?

    The ones between the knuckles are: https://www.finditparts.com/products/289426/flagg-triangle-es431l https://www.finditparts.com/products/289428/flagg-triangle-es431r The one on the end of the drag link is: P-12877-KL0 or 12877-KL I can't find a source for it. The drag link itself is 12650...
  19. yertnamreg

    Non-military rear brake chamber number ?

    It's been a while since I found it. I had a leak in one of mine, and started searching for "0912 piggyback" under the assumption that since the chamber sizes are standard any brand should work that's when I found the Euclid one. The one I actually ended up buying was from a surplus place that...
  20. yertnamreg

    Non-military rear brake chamber number ?

    Find it parts has them listed, whether or not they are in stock is another story... https://www.finditparts.com/products/3653638/euclid-epb0912
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks