• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. MrMikey4026

    What have you done to your FMTV or LMTV today

    I sold my M1078. A veteran of Kuwait, with the 81st Brigade. It most likely served at a Patriot missile site, according to those that were there. The Army soldiers that have seen it are amazed that it has a factory winch on it, they had never seen one before. I didn't tell them that I installed...
  2. MrMikey4026

    Tail light assembly

    Huck bolts as I remember. Note: The frame bracket and light pod on the right side is different on winch trucks.
  3. MrMikey4026

    Transfer case help….M1078 2001

    I think Patrick Foley has some transfer cases, I don't know if they are WTEC2 or 3.
  4. MrMikey4026

    Transfer case help….M1078 2001

    The valve module without the internal harness installed.
  5. MrMikey4026

    Transmission on hill climbs…. Normal?

    Your right!
  6. MrMikey4026

    Transmission on hill climbs…. Normal?

    Make sure you are actually getting full throttle. When the pedal is all the way down, the throttle lever on the governor should be lightly on the stop.
  7. MrMikey4026

    GL 4 Gear Oil Requirement

    Yes
  8. MrMikey4026

    GL 4 Gear Oil Requirement

    Not in the hubs, the axle busing inside the front spindles.
  9. MrMikey4026

    Winch Weirdness

    Just a bit of wisdom I learned when installing my winch, the DIN connectors on the hydraulic valves are known to be huge failure point. They suffer from water intrusion and corrode. They can be purchased from many sources. I prefer the ones with a pigtail installed. I coat everything with NYK77...
  10. MrMikey4026

    M920 - manual tachometer needed

    There is a thumbscrew on the pump run solenoid that defeats the electric solenoid. Just screw it in and it should run forever if an electrical problem is occuring.
  11. MrMikey4026

    CUCV '400' tranny will not shift out of 1st gear - what should I check first?

    Unplug the wire going to the transmission to see if it shifts. The downshift is electric, if the switch is shorted it will cause that symptom.
  12. MrMikey4026

    Anybody have any recomendation on shipping an HMMWV Ambulance From Yermo to WA state

    The Roundup is September 1-3, same place. Dave has a post on Pacific Northwest steel soldiers. That is all screwed up. The real information is in his comment. I might see you there.
  13. MrMikey4026

    Anybody have any recomendation on shipping an HMMWV Ambulance From Yermo to WA state

    I could just hit you in the head if you like? Do you have the other one operating? Did you get your transmission leak fixed? You going to the Roundup this year?
  14. MrMikey4026

    WS-133 Minuteman Missle carrier Truck :) Weight?

    Two of them were just sold in Western Washington, I don't remember where they went. The two I know of were used in the movie "In the army now". Terrible movie with Pauly Shore, they were the Scud Missile launchers. I did not know there were anymore left. They were built by Boeing.
  15. MrMikey4026

    M1078 Trans filters

  16. MrMikey4026

    Anyone put a lock in their battery boxes?

    I don't bother to lock mine up, they are protected by several high speed wireless devices.
  17. MrMikey4026

    Cab Tilt Pump M1078 A1

  18. MrMikey4026

    Western WA Rollcall

    Location: south of Puyallup. M1078 winch truck, soon to be for sale. I am going to downsize and travel before I die.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks