• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. J

    Check your axle ubolts

    So had a small shake around 55mph Checked everything out and found no issues and assumed it was just unbalanced tire. Well today went out for a smoke and saw over half of the passanger side front ubolt had split clean in half and feel out within the past day where its normally parked In a...
  2. J

    Check your axle ubolts

    Smoking isnt good for you but found this laying in front of my 08 m1083 with only 2600 miles Time to order new ones definitely suprized me
  3. J

    Diy center console stereo

    Keyless system installed today And video of the remote start Itll crank up too 6 seconds and give it 3 trys before the system will give up for cold weather days Run time is 15mins before it shuts back off Also installed a block heater today
  4. J

    Diy center console stereo

    Not sure these were amazon cheapos they do the job but dont see them lasting very long. The center console, just plugs into the 12v plug, not worried about saving station as I always stream off my phone and this radio atleast remembers last connected device. I'll post a video tomarrow showing...
  5. J

    Diy center console stereo

    Just installed power locks and windows
  6. J

    Diy center console stereo

    Dash heater has about 1/2 gap on either side about 4 inches high still probably restrictive but we shall see. And 3d printed them https://www.thingiverse.com/thing:1004856
  7. J

    Diy center console stereo

    Add a pair of 2 axis cup holder for zero spill drinks on high angles, and the system just plugs into 12v outlet since it's no a powerful system
  8. J

    2008 M1083a1 no 24v on gauge or charging

    Ahhh thank you, I wasnt comprehending previously. I will see what a shop finds out and report back thank you for your help
  9. J

    Diy center console stereo

    About 2 hrs to build $30 speaker radio combo from walmart $90 amp sub encloser gutted and installed Just need cup holders installed and itll be prefect https://youtube.com/shorts/pc3U9HZJpQs?feature=share
  10. J

    2008 M1083a1 no 24v on gauge or charging

    So ran thru the manual for the regulator and alternator, voltages are all correct and harness voltages are correct, lbcd harness tested voltages and found that on pin b is only . So possibly it has a bad diode Any chance does anyone know where this would be located to test Lbcd shows solid red led
  11. J

    2008 M1083a1 no 24v on gauge or charging

    Everything is wired up and voltage is 12.7 across ea ch of the batterys, 25.6v on the 24v side disconnect light is on after about 10 seconds after starting Noticed the alternator leds flashing green but every 30 secs the one closest to the front of the alternator will flash red one time and...
  12. J

    2008 M1083a1 no 24v on gauge or charging

    I picked up two new 6t batterys, and installed them. Same issue I'm woundering if the 12/24 wires are connected correctly, issue becomes I cant not find any info anywhere on the battery cable tags have 2 positive, one negative and then one small black wire Tags are tl10c Tl520c Tl99c Tl607
  13. J

    2008 M1083a1 no 24v on gauge or charging

    9 months of waiting and finally got my m1083 home and sf97 in. Very happy felt like a little kid driving it around But I'm needing some help if you dont mind getting everything straighted out on it 24v system doesnt registrator on the gauge. Checked power at the batterys and doesnt show a...
  14. J

    pickup / possibly ship m1083 Tucson, az

    finally recieved euc on my m1083, is there anyone around that can pick it up while i get shipping handled, or transport it to mass, 2600 miles thanks, Jack
  15. J

    Well I sold my deuce while ago and now it's at state wide auction

    Well I sold my old duece month back and i was out scouting the local auction yard for this upcoming auction to see what I couldnt live without and just came across my old duece in it...
  16. J

    Anyone ever seen the IP extension housing split in half [emoji21]

    Yep besides oil leak would of never noticed, And all brackets are in place so I'm a lost on what could be the cause https://youtu.be/joyKYASeEv8 Sent from my SM-N950U using Tapatalk
  17. J

    Anyone ever seen the IP extension housing split in half [emoji21]

    Just completed a full maintenance on the duece new filters and flushed the system drove about 2 miles and when I got home noticed a oil leak arg was hoping it was a loose oil filter housing Sent from my SM-N950U using Tapatalk
  18. J

    Ld-465 max rpm 1800

    Probably so, none of the lights works another project to get too Sent from my SM-N950U using Tapatalk
  19. J

    Ld-465 max rpm 1800

    Just drove it after a full maintenance and it's a completely different truck quite, and plenty of power Sent from my SM-N950U using Tapatalk
  20. J

    Ld-465 max rpm 1800

    I'm going to assume it's a 1966 filter that has never been changed Sent from my SM-N950U using Tapatalk
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks