Search results

What he said:), You're track looks great. Gary

Nice work, you're moving right along. If you're talking about the shaft for the spring perch I used an air hammer and penetrating oil to work the shaft back and forth until it finally slid out. Gary

Nice work, keep the pictures coming. Just remember longer pry bars, bigger jacks and bfh's8) Gary

Nice halftrack, It's time to get the torches out and start buying cases of penetrating oil:). Good luck with your project and keep us posted. Gary

I have a Brut blaster, it works great. I have tried some "inexpensive" ones only to have problems. With the Brut I just blast away. Gary

:drool:

Very nice halftrack, good luck with it and of course more pictures. Gary

Nice work, the track looks great[thumbzup] Gary

Kenny, Nice job and a lot of work. The truck looks Great[thumbzup] Gary

Karl, Great work, I just put the bogie wheels on one side. I have a long way to go to get to where you are. It looks like you're moving right along. Gary

Does anybody know what the 13 1/2 means on the side? Gary

Karl, Great project, keep the pictures coming. Gary

Those tracks will slip right on, just need a little leverage.:) Gary

Thanks for the ride in the WC.:-D Gary

Eric, Glad to hear that your problem has been found and is being taken care of. Thanks for the update. Gary

Eric, did you pressure test the system as Todd had mentioned and was that loose bolt a head bolt? How about the cylinder walls any cracks? Usually if a cylinder has a water leak the top of the piston and cylinder head would be clean or cleaner than the others. Did you notice any excessive white...

Eric, pull your spark plugs out to see if there's a sign of water in a cylinder or cylinders such as a clean plug. Also check to see if the top of any pistons are clean. Gary

Thanks Karl, My motor seems similar to yours, I have good compression, oil pressure and vacuum. It does smoke a little and has some blow-by. All cylinder compression is 120. I don't think it needs a total rebuild but I would like to fix it while the track is in pieces. Thanks again Gary

160ax Hi Karl, I'm getting to the point of doing work on my motor and looking for some advice. Can you tell me about your in-frame, what you did etc. ? My motor seems to run good, but I do have some blow-by. Thanks Gary