Search results

Ok, we are all back together! Made sure I Had good fuel flow and new gas. I checked for leaks and looks like we are good to go. Pulled start it about 20 times and not wanting to fire over. Removed the air cleaner and put a good shot of starting fluid in the intake and we have a running mule! I...

Appreciate the in site just something else to look at thanks!

I just finished removing the carb and the fuel pump. You have to see the pictures! I took the carb apart and look at all of the dirt that was in the bottom of the bowl! I scraped it out with a screw driver. Lucky for me I have a new one on it's way. Second is the fuel return line at the carb was...

Ordered new plugs and fuel pump, new carb is on it's way, Need to order air intakes, Thank you all for your input it's greatly appreciated.

I have a pull start no problems

Spark plugs I just got the plugs out I used a 22mm deep socket sorry to say it fit perfect no slop at all. Here is a picture of the plugs as they came out with out any cleaning. black but not fouled, gap looks clear no foreign matter was found. No oil or them being wet... just black.

Fuel return line? I never thought of that going to take it apart and blow some air to see if that will work. Stupid question what is the function of the return line? Is it under pressure? Just wondering.I just ordered a new carb for it as well being it's the original one. I am guessing there is...

I usually take my mule to air shows and parades. After sitting for about 7 months I tried to pull start it and most of the time it fires right up. Well it did no do it this time. So I hooked it to my truck and bump started it and ran fine. I took it for a spin down the drive way after it was...

He will be missed!

I am looking for the female connector, I have my battery made up but I am looking for the connector? any ideas or part numbers?

prc-6 Yes I have a set of plans and I plan to make one. I am only going to make one for the time being this was I can check both raios to see if they power up at least, thank you for your reply, Ray

Looking for some help in locating batteries for my radios or some kind of adaptor kit for my PRC6 RT-196

Well I pulled the enging this morning and it it not the transmission shaft seal. The 90 weight is leaking from the axle seal on the right side.as you look at the bell housing. Well you would never know unless you remove the engine. So I have my work cut out for me today. I have to remove my...

Thank you for the info.

I have a transmission leak, the shaft seal in the bell housing is leaking 90 weight oil not motor oil, I need to pull the motor to gain access to the seal. Do any of the members have a ref number for the transmission seal.