Search results

Changing all the glow plugs on my M1097R1 I bought off govplanet out of texas a couple weeks ago and every one tested bad. On the last one #2 back from front on driver side it came out with no plug on the end just the threads. I tried easy out with no luck and finally removed the injector...

Does anyone have a good source for the rubber plug connectors (I've seen them called packard, and deckard). Looking for the rubber boots and the internal spades. I ordered what I thought was correct on amazon and they turned out to be same size rubber plugs but the metal connectors were not...

Does anyone know what kind of diode or a part number for a diode to replace the in wire diode in the horn circuit? This is the wire that goes from the horn to ground. I found one post here that said they thought it was a 3 amp diode.

I have been trying to find the location of the ABS electronic control module. Does anyone know where it lives?

I have an M936A2 that when I start it pegs the voltmeter for exactly 5 minutes then drops down to normal. I have measured with a voltmeter to confirm and it goes to ~34 volts for the 5 minutes then drops back to ~25. When I got the truck the wire to the alternator was disconnected and now I...

This truck is new to me so I have been going over things and found some disconnected steel lines and a disconnected wire on the transmission. Wonder if anyone can help me identify these and why they might be disconnected. Here are some pictures of the steel line And here is a picture of...

I have a 1991 M936A2 that I recently acquired. I bought it knowing it had an issue running correctly. It will start only when given a little accelerator. It will only run from about 800 rpm up. From there it seems to run fine. Below that it stumbles and dies. If you let it idle down to...