• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. bshupejr

    Turn signals not working - steering column wiring

    Well, interesting turn of events; After cleaning everything and then putting it back together, it works. Lol. Im still concerned that with the key off and the signal lever on the left or right position, the corresponding dash indicator illuminates dimly. The outside lights don’t come on, just...
  2. bshupejr

    Turn signals not working - steering column wiring

    Something I just discovered by accident: When the key is off: if I rotate the switch to left or right, the dash signal indicator lights come on dimly and then if I put my test light on it the full signal function comes on. Maybe I just accidentally discover how to bypass the key power as there...
  3. bshupejr

    Turn signals not working - steering column wiring

    So, I took apart my steering column to see if I could find any birds nest or piles of corrosion. Pretty clean in all and nothing painfully obvious. I think I did confirm that I have a ground problem in the area though as I was able to get proper functionality from the turn signals and hazards by...
  4. bshupejr

    Turn signals not working - steering column wiring

    Yes sir, I’ve been working that list diligently. That’s where I found out about this tree. I was happy to find that mine has all the grounds noted as frequently missing. As mentioned, I’m into the steering column now.
  5. bshupejr

    Turn signals not working - steering column wiring

    thank you. Yes, I’ve been through all the sockets. I replaced two so far that had the ground wires so bad they were rotted off in the socket. Replacing those cleared up my problem with the dash arrows staying on all the time. Yes, the original trailer plug is in tact. I’ve used it once or...
  6. bshupejr

    Turn signals not working - steering column wiring

    Thanks for all the input. I have tried swapping the hazard flasher for the signal with no change. I bought a new flasher and installed it. No change. I’ve been through the very detailed ground checklist provided here on SS and cleaned up the ones that needed it and verified the truck has all of...
  7. bshupejr

    Turn signals not working - steering column wiring

    That was my understanding too so I was pretty shocked (see what I did there) to find nothing attached to it. I would sure be in love to discover attaching a wire to it would solve my problem. Lol
  8. bshupejr

    Turn signals not working - steering column wiring

    Good afternoon, I’m trying to iron out why my turn signals flash slowly or not at all. I’m working through identifying and cleaning up all the grounds in the truck (M1031) and one thing that kind of surprised me is that the ground tree above the e-brake has nothing in it beyond a single wire on...
  9. bshupejr

    Passenger side fuel tank installation

    Could that Blazer tank fit between the frame rails in the stock spare tire location? 71 gallons total capacity?
  10. bshupejr

    Passenger side fuel tank installation

    A basic plumbing and wiring drawing would be great, thanks.
  11. bshupejr

    ISO Motor mount plate

    Thanks! I’m in WA but I already found one and am squared away with the repair. I don’t want to do it again though. If a couple hundred bucks on bracing bars will help ensure that then I’m going to try and get it done if I can get the parts. Sent from my iPhone using Tapatalk
  12. bshupejr

    ISO Motor mount plate

    What are the chances of this type of damage being caused by fork lifting the trucks around a yard at auction?
  13. bshupejr

    ISO Motor mount plate

    Its a GM diagram. Likely the civi version not the CUCV. To be honest, Im really confused. I called and talked to ORD and they said they dont run those on any of their trucks and they dont have any problems. No CUCV owner Ive talked to has them either. And yet, this cracked bell housing seems...
  14. bshupejr

    ISO Motor mount plate

    Hey, my transmission shop says they won’t warranty transmission repairs without the factory brace bars that go from the NP205 to the bell housing and from the bell housing to the block/motor mounts. I’ve found a set of the brace bars but there is a steel plat that goes under the motor mount with...
  15. bshupejr

    Passenger side fuel tank installation

    Thanks for that. Do you have any documentation on the switch and valve set up? My truck is actually a 1031 and I turned the box into a trailer and put a civi 454 bed on it with the passenger side fuel door.
  16. bshupejr

    Tranmission to Engine Supports

    As far as I know the engine and transmission mounts are all fine. Is it possible this damage that could have been done by fork lifting the truck around at some point in the past?
  17. bshupejr

    Tranmission to Engine Supports

    Good afternoon, I just found out my transmission case is cracked. The transmission shop said that this is a common occurrence on these trucks when; the factory supports are removed and not reinstalled. According to the shop, there are some steel supports that go from the transmission to the...
  18. bshupejr

    Passenger side fuel tank installation

    Agreed. I think filling up two tanks is less friction than managing cans and protecting them from damage, theft, leaking etc. Also, I can use the passenger side as a true aux tank and only use it periodically. Might even toss in a bit of stabilizer.
  19. bshupejr

    Passenger side fuel tank installation

    Thanks, I’m more interested in time not necessarily distance and/or back country off road driving and not worrying too much about fuel. This would be a much better solution than jerry cans in my opinion.
  20. bshupejr

    Passenger side fuel tank installation

    LMC has gas and diesel specific tanks for both sides so I’m confident all the parts are available. Question really comes down to the chore of making a system work within a system not designed for it and sort of volatile where wiring is concerned.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks