Search results

Now that I have it functioning properly I plan to soda blast it clean and then prime and paint it with Rustoleum Hammered finish paint. Probably gray or light blue in color. Since it is more than I can use I will put it up for sale.

OK. I took the corkscrew shaft off and inspected the collar & set screw. The set screw came out with a screwdriver. The part sheared on the shaft (spindle) was easily drilled out on the drill press. I used a flap wheel sanding disc on an angle grinder to sand the squarer ram clean behind...

Actually I hit it with a large hammer on the end of the square tube (after applying liberal amount of penetrating oil) and got the jaw to move slightly. I used a craw bat to pry it further. Looks like it will will move further if I put a block in there and pry again. If i can remove it or...

I did a bunch of research on Google and came up with the manufacturer may be Colombian. They may have produced this vise for Ridgid. I also found a parts breakdown for it?

I may take it to a machinist to see if he can re-drill the collar and shaft that held the collar in place. Looks like there was a bolt or pin that sheared. That collar when affixed to the shaft, would move the outer jaw in and out. The vise is also missing the opposing jaw for the pipe vise...

OK here are the pictures. I put my hat on the vise so you can get an idea of the size of it.

I got a good deal on a Ridgid 600PN bench vise that was installed on a M936 wrecker. I need to repair the collar that is attached to the shaft. I is loose and I cannot move the jaw out with it being loose. Just wonder if anyone has come across one or has one. It is HUGE! Pictures to...