Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
OK I have another idea for the sound. You may laugh but have you checked the door strikers on the B pillar? That can cause that drive you crazy sound you are describing. Check it. To see if it is the issue put a rag over the door strikers and slam the doors. Go for a ride see it that helps. A...
No this is a semi flush fitting back in the center of the constant velocity joint. At the rear of the front drive shaft. Between the 2 u-joints clean that area and you will see a small round fitting. You need to grease that fitting until the grease pushes out of the ball of the CV joint. you...
Best advise I can give you is to remove the front drive shaft and clean up the CV joint and find the recessed grease fitting and grease it real good ( Special grease tip) and clean it and work it back and forth and grease it again before you reinstall it. Under normal use that will take care of...
Check the constant velocity joint at the transfer case on the front drive shaft. There is a grease fitting inside the joint that you need to grease occasionally. I hope that helps you.