Search results

Thanks Tim. You came up with some good ideas. Here is another fellow trying to do the same but using solar same principle. http://zillerstore.com/forums/showthread.php?t=3600

I found the manual for the transfer switch and schematics. I also was told that I can run the motor in the panel with a 9volt battery and make it switch by doing this:" Negative wire to 23 on terminal block inside panel. "Break the positive wire through a switch and connect to 15B on strip...

Thanks for the replies. It is a MEP-003a and I would only use manual transfer. Maybe a 50amp receptacle on the generator and one on the house. The home already has a Generac 5449 main panel which has an automatic transfer switch built into the panel itself. I think I can switch this panel...

Would this be of use with a MEP series install or unnecessary?. I am trying to line up what plugs/boxes I need to plug a cord into the house and then take it to the panel. Reliance LL550c plug and a PB50 using 6/4 soow cable with a box outside should work. What do you guys use to get the power...