Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I'm getting there...took several pictures but haven't figured out how to post them.
Had some help on the weekend removing all my drill pipe, 4X4's, 2X4's, 2X6's (last two were blocks) used to lift and slide my bed back and a Pipe saw Horse the bumper rested on.
Bed is sitting on the frame...
Rerouted the fuel pump line to carb and spun her over (with a splash of fuel in the carb.) and the first try she caught the fumes out of the fuel filter and fired right up.
Fuel filter stays full and the gas gauge works! Now have to hook up the exhaust pipe assembly and then realign the bed to...
Hi Bob...I took my old pump off yesterday and installed a new one today. Talking to a few guys at the Napa I use, I found out that leaving ethanol in your fuel system over an extended amount of time will destroy (maybe compromise is a better word) the diaphragm in the pump. I last changed the...
I installed the fuel tank, after removing and cleaning it, replacing sending unit and all new fuel line from the tank to the carburetor.
Only lines not hooked up are the fill hose and vent which are an assembly.
I put approximately 4 gals. in the tank then tried to start it.
Using a remote...
I agree... in that picture, before locating the new unit, I bought the brass float, sock and a role of rubber gasket material, so now they will go in a box or plastic
bag stowed away and I'll probably never remember where I put them.
I appreciate you and everyone else's input...I was going to add the site to the M880 TM PDF section but was hoping someone
that was more computer savvy would do it for us.
Yes, it was very challenging but it should benefit all of us M880 owners. I didn't explore all of their inventory but...
Thanks doghead & NDT...for your posts. I have tried to find one for a W200 & W300...same result.
While waiting for reply's, I've been trying to solder the swing lever on mine and it worked several times (ohm swings from full to empty)
so ready to install and decided to check once more...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!