Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Since Mr. Gasket is a part of the Holley family of products I wasn't too worried about getting Chinese junk.
https://www.holley.com/products/cooling/thermostats/parts/4367
With the heat wave we've been having recently it's hard to tell. Back when I did this I believe that the time between fan cycles did increase slightly but maybe that was only wishful thinking on my part. What I wanted was the 180 degree thermostat like Mogman said but I was also looking for as...
Gentlemen, This was my error and I apologize for it. The correct part number is their 4367 thermostat with a diameter of 2.5" with an opening temp of 180 degrees.. Their 4364 is only 2.12" in diameter and as Mogman points out it WILL NOT FIT.
BAD DATA HERE! THE CORRECT NUMBER FOR THE MR GASKET THERMOSTAT IS 4367. This is their 2.5", 180 degree thermostat.
Papakb
With the warmer summer months here now I wanted to post this information on the thermostat I just installed. I had the front end pulled apart to replace the fan clutch...