Search results

I'm putting all the stuff that I pull out into a box and will likely be looking to trade or sell soon. Ill let you know when I figure out what I need. The ignition and rear window are still on the CUCV key, but once that is done I wont need it.

Is your new lock keyed with the CUCV key? No, That was the point of changing the locks.

Took the opportunity to lube and clean inside the door. The windows really worked alot better after the wd40. Just hold the window as you roll it so it wont fall off track. Insert the new lock and make sure it goes in the slot on the arm inside the door. Put the retaining clip on inside of...

Inside door looking at lock (pic 1). I cut the paint from around outside so it wouldnt peel back when I pulled it out (pic 2). Pulled clip from cylindar inside door (rusty part of pic 1). This is easier if you give it a shot of wd40. There is a small tab that needs to pried up (gently) to...

I replaced the door locks today, and thanks to WARWAG for the pick and the write up. http://www.steelsoldiers.com/cucv/61076-cucv-door-lock-replacement.html Here is my write up with pics. Pepboys for the locks part# DL15250 less than $20. (pic 1) Pulled all screws from inside of door...