Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Mine doesnt lope really but i also have the fuel turned up pretty hard on it. I finally broke down and purchased two new yokam commerical grade batteries. 925CCA with 160RC and it cranks it fine but i still have the ignition issue. as soon as i turn the ignition over while it is running, i can...
starter leads read 25.4v, relay reads 25.5v, battery reads 25.6v..... i mean, i guess having the ignition off isnt that big of a deal....my fuel tank is in the back so fuel always gets to the motor...i can still turn my headlights on, my tach and speedo work, only thing i cant read is temp...
true, im not sure....how can i tell? yesterday , i put 2 brand new batteries in it and went to crank it and it started with just flipping the ignition on once and then i killed it and started it again and had to hit the start button.... can i use any relay to replace? well, any 24v relay that...
where the arrow points, there is a fitting on the hub. closest pic i have of them. i simply drilled out a hole, tapped it, and threaded a zerk fitting into it.
i dont have any pics of it right now but i can get some. I took the 2 1/2 tons out and got some 5 tons and the fittings are on the side of the hub assembly (inside the rim well). It was not my idea, i saw a few guys had fittings on their 2 1/2 ton mud trucks hub assemblies so i asked and now i...
thats every weekend lol. i have new seals and bearings in them. also have outers packed with grease and zerk fittings on them so i can pack them every weekend. has worked great so far. got stuck a few weeks ago and had to leave it in some nasty clay/water/mud/crap overnight so i just knew they...
ok i will also check my connections but how could i test the amp draw digitaldust? or just make sure all connections are tight and clean and should be good to go? i dont think it is a bad connection because the starter will come out, it just wont spin!
well the starter really has never gone under completely. it has gotten pretty covered though. i usually pressure wash the truck every sunday after takin it out but if the seals are bad then def could have some gunk in there. When i took it off it looked pretty clean in there but then again i...
so as you can tell, my deuce is PURELY a mud truck... got the truck about 6 months ago and have had really no running issues with it...until now. The starter began to hang up on me when i first got it so i flipped the disk in the solenoid and it was fine. well, now the starter will not start. at...