Search results

no but look at the top right ...... where can I get the tool ..... and how much is pricey .... i have spent tons with my local snap on guy

well I now know how to use a multimeter and now know all the GPs are dead..... if the tips are swolen a vid says just keep twisting they will come..... is this true? and thanks worthog for reminding me bout youtube ..... guess ya cant put a price on educationaua

at the risk of sounding stupid i have a meter but dont know how to set it for ohms .... i tried it and got nothing ..... thats when i got the test light ...... sorry for not giving that input ...... just been getting fustrated and apprecate all your help

the card is burnt..... and i found out when i had it at the trans shop last week for the governer they shot it with eather after i told them not to and the relay burnt out ......... i think when i put the wrong relay in I burnt the card

ok i tried it again and now it clicks on when i ground the blue and i get power to the GPs green wires ...... so is it safe to say the controler card is bad?..... I just ordered a new on and 8 GPs from cucv electric alot cheeper than the parts store $71 for the GPs and $67 for the card

i dont understand why the relay isnt clicking on even when i ground the blue with a jump wire

standard prouducts #SS584 witch is the same as the napa st85 according to the cross refrence from napa

didnt test the glow plugs cause the relay wouldnt clunk..... when i grounded the blue no clunk i jumped the red to the orange and clunk and the wait light came on but again would not go out untill i disconnected the jump

ok now that i replaced the relay with the napa # relay now with the key on i get power to the red (batt) the pink and the blue and nothing to the orange..... now what.....

looks pretty simple ..... when I cut the red , use the side comming from the bottom or behind the black cover..... I seen one thread that a guy put a big fuse on the batt and ran a new cable from the 12v batt..... where do I get a GP removal tool or is it just a deep socket? new GPs for $13 each...

ok wiil do ..... do you have a link to the 12 v conversion?...... no tricks on getting them out?

Do I have to pull them out to test? if so I might as well change em.... I read horror stories about getting them out ..... doghead you seem to know all about these trucks so what GPs do you recomend, some say welman some AC ..... and do you know any tricks to ease the pain on getting them out

Yes thats the thread...... new glow plugs? ya think they are bad that fast? it did it and i didnt drive the truck I shut it off and ran to you guys

I dont remember the #...... I forgot to stress to my parts guy ISOLATED GROUND!!!

a member named Dstang....... just called my parts guy and your right its not an isolated ground relay ..... he will have the right one in the morning ..... I gotta say you guys are the best ... Thank you

ok i see what you are saying

I seen others on here use it ..... could the card be bad?

I just changed my GP relay with a *ord starter relay , after I hooked it up the first time I turned the key on it worked properly wait light came on then went out started fine. then after about 15 min the wait light came on and stayed on and the relay has power on all 4 term. the blue one being...