Search results

I wanted to try to elaborate on this flipping the angle a little more. I tried to find some pictures of when i made it but didn't have any, so i tried to draw on the best picture i had of it. I flipped it with the flat facing up and towards the gen, then used the rubber isolators to help dampen...

i just used the factory angle and flipped it.

i think they are 5/16" holes... But i tapped them for 3/8" bolts.

Ok i found the housing and can confirm they are 1/4 NPT.

I couldn't find an original 90 to check in my pile of fittings and couldnt recall where i put the original housings to try to measure them. i'll keep looking for the housings.

LITD, yes the bases are 1/2" NPT and i think the 90's were 1/4" NPT??? i'll go see if i have one laying around in the garage somewhere that i can confirm.... I'm pretty sure i got the reducers from Lowes, so its a common size.... (i think)

I agree with you Guy that its good to have a filter that has a clear bowl so you can keep an eye on it. I have added some like the attached pic to my smaller tractors that surprisingly don't come with good filters. But working with large heavy equipment i have learned that it seems you can't...

I don’t recall right now if I needed anything special or adapters, I’ll go look at it in the morning. I think i reused the fittings from the stock filters and just used some reducers for the 90’s to fit the bases. But I’ll get you a definite answer tomorrow.

Here's what i did. WIX 33405/ NAPA 3405 - 14 Micron Fuel/Water Separator Filter WIX 33352/NAPA 3352 - 6 Micron Filter NAPA GOLD 4770 - Remote Mount Spin-On Filter Bases I also found a 2 micron filter after i ordered the others that i will get for spare. WIX 33528/NAPA 3528 - 2 Micron Filter