Search results

Thank you for the final suggestions. I ended up letting it sit for a while. A friend ended up being interested & I made a trade deal, so they have it now and are going to dig in. Going to share this thread with them so they can get the details on exactly what I did better than off the top of my...

I thought so to, but there isn't. It is a Normaly Open solenoid and not getting power. It is clear. The way to test this is to disconnect it, then in theory it should never heat, only do low pressure. Even with the power disconnected, it is building pressure. I confirmed it was clear by removing...

Here is the broken solenoid next to the new one. Fittings moved over. New fuel filter setup. You can see some of the new fuel lines as well. Not easy to get in there for picture, but here is the new spot I put the solenoids in, on the inside where the fuel selection valve is. That way they...

I wish I had time to be bored. It can be fixed I'm sure, but I'm just not sure I want to put anymore time & money into it. I will make a last post with my issues & hope down the road someone will have a solution before it gets taken apart or sold as-is.

Yes, I sold it on eBay. It has me completely stumped as to why it is not working. Everything is exactly as it should be. Makes it even worse that it all snowballed from the nipple breaking trying ti just tighten up a leak...

Well, this project may officially be abandoned and be one of the biggest let downs I have had! Got the new solenoid in. Installed. Same issue. Spend a few hours troubleshooting and trying things. Everything is 100% as it should be plumbing and electrical wise, but in vent, there is to much...

Got to spend some more time with this. Ordered two kits to make all new fuel lines; https://amzn.to/3IjXrWt https://amzn.to/3jUipBa Also, ordered a few new fittings; https://amzn.to/3CqAvAX https://amzn.to/3VPNQtj https://amzn.to/3GGFX5u The fuel filer I ended up installing...

Well, I had a setback on this thing that keeps snowballing! It started to leak fuel between the two solenoids. Of course, the way it is plumbed, it is at a super hard to get place and you need to disconnect almost everything to tighten it. Did all that, but in the process, the brass nipple...

Updated my lat post with the missing picture. Fiddled a little this morning with more stuff from my hoarding bin and was able to change out the external fuel connection with some stuff from an MEP 802A that I parted out so it is the same connection as the fuel hoses from the generators if I...

So, installed the new gauge today. Old one had a ton of rust come from behind it. It isn't a direct replacement, even though it is a NSN replacement. New one has NPT, the old one was AN. Also, it was slightly smaller but did mount in the hole. I used parts from my stock to make it work. I...

Amazing! Found one. Got it on it's way.

Here is the overview video I said I was going to make;

It is a 0-200 PSI Fuel pressure gauge, part number G32781. NSN 6685-01-399-0065. NSN information really doesn't seem correct as it comes up with temperature information.

Made the missing cover fit that came in. Last thing, is the fuel filter and fuel pressure gauge. The gauge I got will fit but I found in the TM that the pressure goes higher than the range I got. Not sure if I will install it. Finding something to replace it is seeming to be hard. I'm wondering...

Connector came in and I got the thermostat remote all setup as it should be so that it is removable. A few more small parts are on their way. Once I get it 100%, I will probably make a video about it since there are none out there to my knowledge, showing how exactly it works and stuff...

Will go look now, thank you!!

Alright, so... in my over thinking, I completely forgot there is a wire diagram right on the unit under to cover for the controls. o_O Anyways, in looking at it a bunch of times and scratching my head, I realized when I wrote down what wire goes where, I crossed wire colors in the thermostat...

I wired to thermostat up temporarily while I'm waiting for a new set of connectors to come in. It gets power and does what it is supposed too. Burner doesn't want to start though, even when I put the remote in "HI". Looking at the wire diagram, I think it is the S3 switch that may be bad. It's...

Okay, so I had to come here to complain... I found the information I needed. The file was on a clickbait site but I managed to get the information I needed. Couldn't extract the whole TM from there.