Search results

Installed the new air governor... ended up using DOT nylon tubing from the firewall to the tee (that short foot long piece of copper was hard as a diamond as too hard to try to bend straight) I think the guys at the parts store may have sold me the wrong connector because after a few turns of...

Ill try my OTC tubing bender to try and straighten the slight curves, should be interesting!

Thanks for all the info! Can I slightly bend that old copper to reach where it should on the new governor? Or should I replace, I would like to keep the originality of the copper system.

Does anyone have a good resource for purchasing the brass fittings online? I stopped by 2 auto parts stores, Home Depot and Rural King today and none of them have the fittings in-stock.

I just checked behind the old governor, the original mounting holes are there. I also measured the lines and they seem to be original spec sizes. (ill still bring the old fittings to the hardware store...just in case) Does anyone know the thread pitch for the 3/8 x 2 mounting bolts? Thanks...

I would like to replace the adapters and will need the newer style longer bolts when installing the new governor; does anyone know what size part 3, 5, 7 and 9 are as noted from this TM excerpt?

Thanks for the info!! 1970 AM General... Here is another pic for reference

I will pickup a new Bendix unit from Napa tomorrow H284358. Are there any other fittings or mounts I would need to replace something that old?

Greetings! I was thinking of replacing my air governor based on some clicking I've heard in the cab of the Deuce (the air system is building pressure to about 90 PSI). I think mine is either 1970's vintage or was replaced with a non-standard unit, because it doesn't look like the ones I've...